Latest DEA-5TT2 Actual Free Exam Updated 62 Questions [Q36-Q57]

Share

Latest DEA-5TT2 Actual Free Exam Updated 62 Questions

Online Questions - Valid Practice DEA-5TT2 Exam Dumps Test Questions

NEW QUESTION # 36
What accurately describes the Network Time Protocol (NTP)?

  • A. Client makes sudden changes in time to keep synchronized.
  • B. Time synchronization algorithms do not account for clock drift.
  • C. Implemented on a Dell EMC Network OS 6.
  • D. Client synchronizes among a set of distributed time servers.

Answer: D


NEW QUESTION # 37
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?

  • A. Network
  • B. Transport
  • C. Data Link
  • D. Physical

Answer: C


NEW QUESTION # 38
A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?

  • A. 255.255.255.248
  • B. 255.255.255.254
  • C. 255.255.255.256
  • D. 255.255.255.252

Answer: D


NEW QUESTION # 39
On which Dell EMC Networking switches can Multi-Chassis Link Aggregation (MLAG) be configured?

  • A. C9000 Series
  • B. S-Series
  • C. Z-Series
  • D. N-Series

Answer: D


NEW QUESTION # 40
Router A is directly connected to Router B over an Ethernet link. The local interface address for the Router A Fo0/48 interface is 144.254.32.2/24. Which routing table entry is visible on Router A?

  • A. 144.254.0.0/24
  • B. 144.254.32.2/24
  • C. 144.254.32.0/24
  • D. 144.254.0.0/16

Answer: C


NEW QUESTION # 41
Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a host device?

  • A. 182.15.26.10
  • B. 182.15.23.224
  • C. 182.15.25.0
  • D. 182.15.25.255

Answer: C


NEW QUESTION # 42
What accurately describes OSPF?

  • A. Interior gateway path-vector protocol
  • B. Interior gateway link-state protocol
  • C. Interior gateway distance-vector protocol
  • D. Exterior gateway distance-vector protocol

Answer: B


NEW QUESTION # 43
What are the Protocol Data Units (PDUs) called at the Transport layer?

  • A. Packets
  • B. Segment
  • C. Frame
  • D. Data Payload

Answer: B


NEW QUESTION # 44
Which flags are used in the TCP header to initiate and end TCP connections or sessions?

  • A. Initiate = Synchronize (SYN) End = Finish (FIN)
  • B. Initiate = Finish (FIN) End = Synchronize (SYN)
  • C. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
  • D. Initiate = Acknowledge (ACK) End = Finish (FIN)

Answer: A


NEW QUESTION # 45
If a packet is sent to an IPv6 address and many devices receive the packet, what is this type of traffic?

  • A. Unicast
  • B. Multicast
  • C. Broadcast
  • D. Anycast

Answer: B


NEW QUESTION # 46
Which port type does a Dell EMC Networking N-Series switch have for its console connection?

  • A. USB B
  • B. RJ-45
  • C. USB A
  • D. DB9

Answer: D


NEW QUESTION # 47
When configuring a switch, which CLI mode only supports limited show commands?

  • A. EXEC Privilege
  • B. Configuration
  • C. Maintenance
  • D. EXEC

Answer: D


NEW QUESTION # 48
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?

  • A. M6348
  • B. M8024-K
  • C. M6220
  • D. MXL

Answer: D


NEW QUESTION # 49
Which type of domains are connected by a Layer 2 switch?

  • A. Single collision domain and multiple broadcast domains
  • B. Single collision domain and a single broadcast domain
  • C. Multiple broadcast domains and multiple collision domains
  • D. Multiple collision domains and a single broadcast domain

Answer: D


NEW QUESTION # 50
Refer to the exhibit.

Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?

  • A. Switch B Gi1/0/2
  • B. Switch B Gi1/0/1
  • C. Switch A Gi1/0/1
  • D. Switch A Gi1/0/2

Answer: C


NEW QUESTION # 51
Which fields are mandatory TLVs in a LLDP PDU frame?

  • A. Port Description, System Name, and System Description
  • B. IP Address, Default Gateway, and DNS
  • C. System Capabilities and Management Address
  • D. Chassis ID, Port ID, and Time-to-Live

Answer: D


NEW QUESTION # 52
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?

  • A. Forwarding
  • B. Learning
  • C. Blocking
  • D. Listening

Answer: B


NEW QUESTION # 53
What accurately describes IPv6 addressing?

  • A. IPv6 uses broadcast addresses for neighbor discovery.
  • B. IPv6 uses 128 hexadecimal numbers instead of the 32 hexadecimal numbers used by IPv4.
  • C. IPv6 addresses are denoted by eight groups of four hexadecimal numbers.
  • D. IPv6 is used to converse IP addresses and utilize private addresses.

Answer: C


NEW QUESTION # 54
Which port type should be used for only VLAN-unaware devices?

  • A. Access port
  • B. Trunk port
  • C. Hybrid port
  • D. General port

Answer: C


NEW QUESTION # 55
Which IPv6 scope is used for private addressing on a local network?

  • A. Area wide
  • B. Global
  • C. Unique local
  • D. APIPA

Answer: C


NEW QUESTION # 56
Which route type is added to the routing table by a routing protocol?

  • A. Directly connected
  • B. Default route
  • C. Static
  • D. Dynamic

Answer: D


NEW QUESTION # 57
......


EMC DEA-5TT2 (Associate - Networking) Exam is a certification exam offered by Dell EMC that tests the candidate's knowledge and skills in networking technologies. DEA-5TT2 exam is designed for IT professionals who are responsible for managing and maintaining network infrastructure and want to validate their expertise in networking. Passing DEA-5TT2 exam demonstrates that the candidate has the necessary knowledge and skills to implement and maintain network infrastructure using Dell EMC technologies.

 

DEA-5TT2 Exam PDF [2023] Tests Free Updated Today with Correct 62 Questions: https://www.itcertmagic.com/EMC/real-DEA-5TT2-exam-prep-dumps.html

100% Real DEA-5TT2 dumps  - Brilliant DEA-5TT2 Exam Questions PDF: https://drive.google.com/open?id=1NN454WQ8khh2EfReR46IA1Eb5I7IHuS8