Steps Necessary To Pass The 300-430 Exam from Training Expert ITCertMagic
Valid Way To Pass CCNP Enterprise's 300-430 Exam
NEW QUESTION 72
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the global and is opening a new branch in a different location. The engineers' task is to execute all the wireless configuration and to suggest how to configure the switch ports for new Aps. Which configuration must the switching team use on the switch ports?
- A. Access mode
- B. Single mode
- C. Trunk mode
- D. Multiple VLAN
Answer: C
NEW QUESTION 73
Refer to the exhibit.
The security team has implemented ISE as a AAA solution for the wireless network. The wireless engineer notices that though clients can authenticate successfully, the ISE policies that are designed to place them on different interfaces are not working. Which configuration must be applied in the RADIUS Authentication Settings section from the ISE Network Device page?
- A. Correct the shared secret.
- B. Disable KeyWrap
- C. Change the CoA Port
- D. Use ASCII for the key input format
Answer: C
NEW QUESTION 74
An engineer configures a Cisco Aironet 600 Series OfficeExtend AP for a user who works remotely. What is configured on the Cisco WLC to allow the user to print a printer on his home network?
- A. split tunneling
- B. SE-connect
- C. FlexConnect
- D. AP failover priority
Answer: A
Explanation:
NEW QUESTION 75
A wireless engineer needs to implement client tracking. Which method does the angle of arrival use to determine the location of a wireless device?
- A. triangulation
- B. angle of incidence
- C. received signal strength
- D. time distance of arrival
Answer: B
NEW QUESTION 76
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the certificate, WLAN, and radio interface on WGB.
- B. Configure a policy on ISE to allow devices to connect that validate the certificate.
https://mrncciew.com/2018/05/25/wgb-with-peap/ - C. Configure WGB as a network device in ISE.
- D. Configure the certificate on the WLC.
- E. Configure the access point with the root certificate from ISE.
- F. Configure WLAN to authenticate using ISE.
Answer: A,B,F
NEW QUESTION 77
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. Packet direction has no significance; it is always Any.
- B. It must be Outbound because it is traffic that is generated from the WLC.
- C. It must be Inbound because traffic goes to the WLC.
- D. To have the complete list of options, the CPU ACL must be created only by the CLI.
Answer: C
Explanation:
NEW QUESTION 78
A wireless engineer must implement a corporate wireless network for a large company in the most efficient way possible. The wireless network must support 32 VLANs for 300 employees in different departments.
Which solution must the engineer choose?
- A. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the
5.0-GHz band. - B. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
- C. Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.
- D. Configure a second WLC to support half of the APs in the deployment.
Answer: C
Explanation:
NEW QUESTION 79
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)
- A. DOC
- B. XLS
- C. plain text
- D. CSV
- E. PDF
Answer: D,E
Explanation:
NEW QUESTION 80
Which configured is applied to prevent the network from a Layer 2 flooding of multicast frames with a seamless transfer of multicast data to the client when roaming from one controller to another?
- A. Create multicast groups on the central Layer 3 switch.
- B. Enable IGMPv3 on the central Layer 3 switch.
- C. Enable multicast mode on the WLC
- D. Enable IGMP snooping on the WLC
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81671-multicast-wlc-lap.html
NEW QUESTION 81
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- B. Configure QoS on the mobile devices that have Jabber installed.
- C. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
- D. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.
NEW QUESTION 82
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. TACACS+
- B. LDAP
- C. network policy server
- D. RADIUS
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/lan/Denali_161/ConfigExamples_Technotes/Techzone_Articles
NEW QUESTION 83
An IT team is growing quickly and needs a solution for management device access. The solution must authenticate users from an external repository instead of the current local on the WLC, and it must also identify the user and determine what level of access users should have. Which protocol do you recommend to achieve these goals?
- A. TACACS+
- B. LDAP
- C. network policy server
- D. RADIUS
Answer: A
NEW QUESTION 84
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Set QoS to Platinum
- B. Trust DSCP
- C. Enable CAC
- D. Allow WMM
Answer: B
Explanation:
NEW QUESTION 85
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. no authentication
- B. open authentication
- C. 802.1x
- D. WPA2
Answer: D
Explanation:
NEW QUESTION 86
What must be configured on ISE version 2.1 BYOD when using Single SSID?
- A. no authentication
- B. open authentication
- C. WPA2
- D. 802.1x
Answer: D
Explanation:
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/BYOD-configuration
NEW QUESTION 87
A network engineer observes a spike in controller CPU overhead and overall network utilization after multicast is enabled on a controller with 500 APs. Which feature connects the issue?
- A. multicast AP multicast mode
- B. unicast AP multicast mode
- C. controller IGMP snooping
- D. broadcast forwarding
Answer: A
NEW QUESTION 88
Which statement about the VideoStream/Multicast Direct feature is true?
- A. It makes the delivery of the IP multicast stream less reliable over the air, but reliable over Ethernet.
- B. It converts the unicast frame to a multicast frame over the air.
- C. IP multicast traffic is reliable over WLAN by default as defined by the IEEE 802.11 wireless multicast delivery mechanism.
- D. Each VideoStream client acknowledges receiving a video IP multicast stream.
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/configuration-guide/b_cg81/ multicast_broadcast_setup.html
NEW QUESTION 89
A network engineer is deploying 8865 IP phones with wireless clients connected to them. In order to apply the appropriate QoS, the IP voice traffic needs to be distinguished from client data traffic. Which switch configuration feature must be enabled?
- A. QBSS
- B. WME
- C. QoS routing
- D. Voice VLAN
Answer: D
NEW QUESTION 90
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers. Which address provides automatic discovery of the best RP for each multicast group?
- A. 224.0.1.40
- B. 224.0.0.13
- C. 224.0.0.14
- D. 224.0.1.39
Answer: A,D
NEW QUESTION 91
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC. Which configuration allows the devices to communicate over NMSP?
- A. Allow UDP/16666 port on the VPN router.
- B. Allow TCP/16666 port on the router.
- C. Allow UDP/16113portonthe central switch.
- D. Allow TCP/16113 port on the firewall.
Answer: D
Explanation:
Explanation
https://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html
NEW QUESTION 92
A company has a single WLAN configured for 802.1x authentication with the QoS set to Silver. This WLAN supports all corporate and BYOD access. A decision has been made to allow users to install Cisco Jabber on their personal mobile devices. Users report poor voice quality when using Jabber. QoS is being applied only as best effort. What must be configured to ensure that the WLAN remains on the Silver class and to ensure Platinum class for Jabber?
- A. Enable Cisco Centralized Key Management on the WLAN so that the Jabber-enabled devices will connect.
- B. Configure QoS on the mobile devices that have Jabber installed.
- C. Configure an AVC profile for the Jabber traffic and apply it to the WLAN.
- D. Configure the WLAN to broadcast on 5 GHz radios only and allow Jabber users to conned.
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/81/Jabber_in_WLAN/b_Jabber_in_WLAN.
NEW QUESTION 93
......
All 300-430 Dumps and Implementing Cisco Enterprise Wireless Networks Training Courses: https://www.itcertmagic.com/Cisco/real-300-430-exam-prep-dumps.html
Free Test Engine For Implementing Cisco Enterprise Wireless Networks Certification Exams: https://drive.google.com/open?id=1qIuUCWYbbDlFTz5f1-vZPfcJ6fJnQe8x