[Sep 18, 2021] NS0-526 Ultimate Study Guide - ITCertMagic
Ultimate Guide to Prepare NS0-526 Certification Exam for NetApp Certified in 2021
NEW QUESTION 26
You want to modify the existing Snapshot copy schedule to allow for more granularity in your ability to recover data after a corruption or loss.
In this scenario, which two tools allow you to accomplish this task (Choose two.)
- A. OnCommand System Manager
- B. ONTAP CLI
- C. OnCommand Unified Manager
- D. NetApp SnapCenter
Answer: B,C
NEW QUESTION 27
In a MetroCluster IP configuration, which two network portsmust be connected to dedicated switches?
(Choose two.)
- A. the port associated with the node management LIF
- B. the port associated with the MetroCluster IP LIF
- C. the port associated with the cluster LIF
- D. the port associated with the intercluster LIF
Answer: A,C
NEW QUESTION 28
Which two cloud providers allow you to provision Cloud Volumes ONTAP as a SnapMirror destination?
(Choose two.)
- A. DigitalOcean
- B. RackSpace
- C. AWS
- D. Azure
Answer: C,D
NEW QUESTION 29
Click the Exhibit button.
Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?
- A. Reboot aff-02 to resolve the LIF issue.
- B. Move the LIFs to their home ports.
- C. Disconnect the HA connection between the nodes.
- D. No additional action is necessary.
Answer: B
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which volume has the highest level of protection assigned to it?
- A. new_work_vol
- B. mworthen_src1_lun
- C. my_vol
- D. project_a
Answer: B
NEW QUESTION 31
A customer wants to create a new SnapMirror relationship to provide only disaster recovery for their organization. Which relationship type and policy type should they specify in this scenario?
- A. DP and XDPDefault
- B. XDP and MirrorAllSnapshots
- C. DP and MirrorAndVault
- D. XDPand XDPDefault
Answer: B
NEW QUESTION 32
You noticed that your SnapVault relationship is healthy but that the destination volume does not have any Snapshot copies.
In this scenario, what should be performed to solve the problem?
- A. Set up volume destination free space.
- B. Use the snapvault update command.
- C. Set up volume source free space.
- D. Configure a rule with the Snapshot label.
Answer: B
NEW QUESTION 33
A customer wants compression enabled on the SnapVault secondary volume.
Which two statements are true? (Choose two.)
- A. A warning message is not displayed when you enable compression on a SnapVault secondary volume.
- B. Data transfers will be storage efficient after enabling compression on the SnapVault secondary volume.
- C. A warning message is displayed when you enable compression on a SnapVault secondary volume.
- D. Data transfers will not be storage efficient after enabling compression on the SnapVault secondary volume.
Answer: C,D
NEW QUESTION 34
You have a network outage that affects client access to site
You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B.
Which two steps must you perform first? (Choose two.)
- A. Delete the SnapMirror relationship.
- B. Take the source volume offline.
- C. Abort the SnapMirror relationship.
- D. Break the SnapMirror relationship.
Answer: B,D
NEW QUESTION 35
A customer hassetup an SVM DR relationship to provide disaster recovery capability at the SVM level.
The secondary site has a different network configuration. They want to replicate the protocol and services configuration of the primary SVM to the secondary SVM when creating the SVM DR relationship.
Which two actions will accomplish this task? (Choose two.)
- A. Set the identity preserve option to true.
- B. Set the discard configuration network option.
- C. Set the vserver-dr-protection unprotected option.
- D. Set the identity preserve option to false.
Answer: A,B
NEW QUESTION 36
Which two NetApp features would help you to recover from a file share that was encrypted by a ransomware event? (Choose two.)
- A. Snapshot
- B. SnapLock
- C. SnapRestore
- D. SnapMirror
Answer: B,D
NEW QUESTION 37
A volume on a FabricPool-enabled aggregate is consuming 10 TB of the performance tier and 90 TB of the cloud tier. A SnapMirror copy needs to be created on a FabricPool-enabled peer cluster at a disaster recovery location.
In this scenario, how much data is transferred when the SnapMirror relationship is initialized?
- A. 200 TB
- B. 10 TB
- C. 90 TB
- D. 100 TB
Answer: D
NEW QUESTION 38
You need to use SnapMirror on a SnapLock compliance source volume for a disaster-recovery site. In this scenario, which feature is supported for the destination volume?
- A. load-sharing mirrors
- B. SVM DR
- C. FlexArray
- D. FlexClone
Answer: D
NEW QUESTION 39
You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.
In this scenario, which two statements are true? (Choose two.)
- A. In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
- B. In StrictSync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.
- C. In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
- D. In Sync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.
Answer: A,C
NEW QUESTION 40
A customer wants tochange a SnapMirror replication schedule to update more frequently. They have 25 GB of data per update to be replicated along a single 1 Gbps Ethernet link.
In this scenario, what is the minimum amount of time required between SnapMirror updates?
- A. 20 minutes
- B. 3 minutes
- C. 200 minutes
- D. 5 minutes
Answer: A
NEW QUESTION 41
You areusing SnapLock for SnapVault to protect Snapshot copies on secondary storage. In ONTAP 9.3, which source aggregate feature is supported in this scenario?
- A. SnapLock Compliance
- B. RAID-TEC
- C. SnapLock Enterprise
- D. 32 bit
Answer: B
NEW QUESTION 42
You are configuring SnapMirror on the NetApp Cloud Backup appliance (formerly AltaVault).
In this scenario, which LIF type IP addresses must be white listed?
- A. nodemanagement
- B. intercluster
- C. cluster
- D. cluster management
Answer: B
NEW QUESTION 43
Which two NetApp products reduce the backup time and create a consistent backup for a primary Oracle target? (Choose two.)
- A. SnapMirror for Open Systems
- B. Open Systems SnapVault
- C. SnapManager for Orade
- D. SnapProtect
Answer: C,D
NEW QUESTION 44
You have a SolidFire cluster running SolidFire Element Operating System 10.1 and are asked to replicate to an existing ONTAP cluster.
Which ONTAP destination issupported?
- A. ONTAP Select with the MirrorAllSnapshots policy
- B. ONTAP Cloud with the MirrorLatest policy
- C. AFF A700 with the XDPDefault policy
- D. FAS9000 with the MirrorAndVault policy
Answer: B
NEW QUESTION 45
......
NetApp Certified Fundamentals-NS0-526 Exam-Practice-Dumps: https://www.itcertmagic.com/NetworkAppliance/real-NS0-526-exam-prep-dumps.html