201 Certification - The Ultimate Guide [Updated 2022]
201 Practice Exam and Study Guides - Verified By ITCertMagic
F5 201 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 61
Refer to the exhibit.
According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?
- A. Managed
- B. Remote-TACACS+
- C. Default system configuration
- D. Local
Answer: B
NEW QUESTION 62
What is the purpose of provisioning.
- A. Provisioning allows modules that are licensed be granted appropriate resource levels.
- B. Provisioning allows modules that are not licensed to be fully tested.
- C. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.
- D. Provisioning allows the administrator to activate
modules
in nonElstandard combinations.
Answer: A
NEW QUESTION 63
The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B. Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?
- A. 10.10.20.3:80
- B. It cannot be determined with the information given.
- C. 10.10.20.2:80
- D. 10.10.20.5:80
- E. 10.10.20.4:80
- F. 10.10.20.1:80
Answer: A
NEW QUESTION 64
Refer to the exhibit.
A BIG-IP Administrator configures the Virtual Server to pass HTTP traffic. Users report that they are unable to access the application What should the administrator do to resolve this issue?
- A. Change the Virtual Server name
- B. Reconfigure the Source Address
- C. Reconfigure the Pool Members
- D. Disable .he State
Answer: C
NEW QUESTION 65
Refer to the exhibit.
The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.
What should the BIG-IP Administrator check next?
- A. Large files on the / file system
- B. Results from the platform diagnostics test
- C. Large files on /usr file system
- D. Results from the EUD test
Answer: A
NEW QUESTION 66
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool eb.is marked vailable.
The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. If a pool .eb.is marked .vailable (green) which situation is sufficient to cause this.
- A. Less than 50% of the eb.pool member nodes responded to the ICMP echo request.Less than 50% of the .eb.pool. member. nodes responded to the ICMP echo request.
- B. All of the members of the eb.pool have had their content updated recently and their responses no longer match the monitor receiveAll of the members of the .eb.pool have had their content updated recently and their responses no longer match the monitor. receive rule.
- C. All of the eb.pool member
nodes are responding to the
ICMP monitor
as expected.All of the .eb.pool. member. nodes are responding to the ICMP monitor as expected. - D. Over 25% of the eb.pool members have had their content updated and it no longer matches the receive rule of the custom monitor.Over 25% of the
.eb.pool. members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.The other. respond as expected.
Answer: D
NEW QUESTION 67
A pool of four servers has been partially upgraded for two new servers with more memory and CPU capacity.
The BIG-IP Administrator must change the load balance method to consider more connections for the two new servers. Which load balancing method considers pool member CPU and memory load?
- A. Round Robin
- B. Least Connection
- C. Ratio
- D. Dynamic Ratio
Answer: C
NEW QUESTION 68
Assume a client's traffic is being processed only by a NAT; no SNAT or virtual server processing takes place. Also assume that the NAT definition specifies a NAT address and an origin address while all other settings are left at their defaults. If a client were to initiate traffic to the NAT address, what changes, if any, would take place when the BIGElIP processes such packets.
- A. The destination address would not change, but the source address would be translated to the origin address.
- B. The destination address would not change, but the source address would be translated to the NAT's address.
- C. The source address would not change, but the destination address would be translated to the origin address.
- D. The source address would not change, but the destination address would be translated to the NAT's address.
Answer: C
NEW QUESTION 69
Refer to the exhibit.
According to the shown Configuration Utility stings What is the setting of the User Directory configuration under the Authentication submenu?
- A. Managed
- B. Remote-TACACS+
- C. Default system configuration
- D. Local
Answer: B
NEW QUESTION 70
Which two methods can be used to determine which BIGElIP is currently active.
(Choose two.)
- A. The status (Active/Standby) is embedded in the command prompt.
- B. The bigtop command displays the status.
- C. The ifconfig Ela command displays the floating addresses on the active system.
- D. Only the active system's configuration screens are active.
Answer: A,B
NEW QUESTION 71
A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?
- A. tracepath 10.10.3.75:8080 GET /index
- B. tracepath 'http://www.example.com:80
- C. curl-header 'Host:www.example.com' http://10.10.3.75:8080/
- D. curlhttp://10.10.10.3.75:8080/www.example.com/index.html
Answer: C
NEW QUESTION 72
When configuring a Virtual Server to use an iRule with an HTTP_REQUEST event, which lists required steps in a proper order to create all necessary objects.
- A. create the Virtual Server, create required pools, create the iRule, edit the Virtual Server
- B. create required pools, create a custom HTTP profile, create the iRule, create the Virtual Server
- C. create a custom HTTP profile, create required pools, create the Virtual Server, create the iRule
- D. create profiles, create the iRule, create required pools, create the Virtual Server
Answer: A
NEW QUESTION 73
When can a single virtual server be associated with multiple profiles.
- A. Often. Profiles work on different layers and combining profiles is common.
- B. Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.
- C. Never. Each virtual server has a maximum of one profile.
- D. Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.
Answer: A
NEW QUESTION 74
A user needs to determine known security vulnerabilities on an existing BIG-IP appliance and how to remediate these vulnerabilities.
Which action should the BIG-IP Administrator recommend?
- A. Generate a view and upload to Heath
- B. Create a UCS archive and upload to Health
- C. Verify the TMOS version and review the release notes
- D. Create a UCS archive and open an F5 Support request
Answer: A
NEW QUESTION 75
Administrative user accounts have been defined on the remote LDAP server and are unable to log in to the BIG-IP device.
Which log file should the BIG-IP Administrator check to find the related messages?
- A. /Nar/log/ltm
- B. /var/log/secure
- C. /var/log/user.log
- D. /var/log/messages
Answer: B
NEW QUESTION 76
Refer to the exhibit.
An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?
- A. The pool associated with the virtual server does not have priority group activation enabled.
- B. The pool associated with the virtual server is falling its health check.
- C. The virtual address does not have ARP enabled.
- D. The virtual address does not have route advertising enabled.
Answer: C
NEW QUESTION 77
Assume a virtual
server
has a ServerSSL
profile.
What
SSL certificates are required on the BIGIP.
- A. The BIGElIP's SSL certificates must be created within the company hosting the BIGElIPs.
- B. The BIGElIP's SSL certificates must only exist.
- C. The BIGElIP's SSL certificates must be issued from a certificate authority.
- D. No SSL certificates are required on the BIGElIP.
Answer: D
NEW QUESTION 78
Which three properties can be assigned to nodes. (Choose three.)
- A. health monitors
- B. priority values
- C. ratio values
- D. loadElbalancing mode
- E. connection limits
Answer: A,C,E
NEW QUESTION 79
......
Ultimate Guide to the 201 - Latest Edition Available Now: https://www.itcertmagic.com/F5/real-201-exam-prep-dumps.html
2022 Updated Verified Pass 201 Study Guides & Best Courses: https://drive.google.com/open?id=1DOjp64r5V5FrjkHLZbP6DpGCBp83HguM