HPE2-T37 Certification Exam Dumps Questions in here [Oct-2021]
Updated HPE2-T37 Exam Practice Test Questions
NEW QUESTION 24
Your customer added HPE Primera to HPE OneVlew and enabled volume provisioning on all storage pools.
For security reasons, the customer wants to disable volume provisioning using HPE OneView on a specific storage pool.
How can this task be completed?
- A. The storage pool state should be changed to discovered using HPE OneView.
- B. The storage pool should be disabled using the array management tool.
- C. The storage pool should be marked as read-only using HPE OneView.
- D. The storage pool should be removed from HPE OneView using a PowerShell script.
Answer: B
NEW QUESTION 25
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not configured with the required Smart Link parameter.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks are not added to the Logical Interconnect Group configuration.
Answer: B
NEW QUESTION 26
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Appliance support dump
- C. Firmware deployment support dump
- D. Enclosure group support dump
- E. Maintenance console support dump
Answer: A,E
NEW QUESTION 27
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
- C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame.
Answer: D
NEW QUESTION 28
Which statement about a server profile for an Apollo system is true?
- A. UEFI optimized is the only available boot mode
- B. Enclosure Group Is automatically selected
- C. Fibre Channel connections can be defined
- D. Virtual WWNs and MAC addresses can be defined
Answer: D
NEW QUESTION 29
Which statement about an HPE OneView server profile is true?
- A. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
- B. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- C. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- D. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
Answer: A
NEW QUESTION 30
What is required to add remote frame link topology to HPE OneView?
- A. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
Answer: C
NEW QUESTION 31
Which statement about M-LAG setup is true?
- A. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- B. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- C. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- D. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
Answer: C
NEW QUESTION 32
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Changes to the server profile were implemented directly on the server profile.
- B. HPE OneView was restored from a backup that created ^consistency with the server profile template.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
Answer: C
NEW QUESTION 33
Which components require an HPE OneView license for management?
- A. HPE Primera and HPE 3PAR
- B. HPE Apollo XL 170r
- C. Brocade and Cisco SAN Manager
- D. HPE Virtual Connect modules
Answer: D
NEW QUESTION 34
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Secure boot
- B. BIOS management
- C. Boot from SAN
- D. Workload profile
Answer: A
NEW QUESTION 35
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. A Rack Management Controller must be added to HPE OneView.
- B. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
- C. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- D. HPE Superdome Flex complex can be added by adding base chassis of this complex.
Answer: A
NEW QUESTION 36
What is a network set?
- A. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 37
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Enclosure
- B. Logical Interconnect Group
- C. Server Profile
- D. Logical Interconnect
Answer: A
NEW QUESTION 38
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. Some master modules only support a redundant setup.
- B. A dedicated license must be added to HPE OneView to enable this feature.
- C. There are not sufficient frames for highly available setup.
- D. Firmware on the master modules is too low to support highly available setup.
Answer: A
NEW QUESTION 39
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- B. The firmware repository service must be restarted using maintenance connection.
- C. All of the components are up to date and compliant with firmware baseline.
- D. The firmware repository is not defined within firmware compliance report.
Answer: B
NEW QUESTION 40
......
Verified HPE2-T37 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump: https://drive.google.com/open?id=13YHbcvJRaNz2R_m1fAbfXbQc2dZR2_kw
Pass HPE Product Certified - OneView [2022] HPE2-T37 Exam With 41 Questions: https://www.itcertmagic.com/HP/real-HPE2-T37-exam-prep-dumps.html