Pass Your NSK300 Exam at the First Try with 100% Real Exam Questions
New Netskope NSK300 Dumps & Questions Updated on 2026
Netskope NSK300 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 37
You are implementing a solution to deploy Netskope for machine traffic in an AWS account across multiple VPCs. You want to deploy the least amount of tunnels while providing connectivity for all VPCs.
How would you accomplish this task?
- A. Use GRE tunnels from the AWS Virtual Private Gateway
- B. Use GRE tunnels from the AWS Transit Gateway.
- C. Use IPsec tunnels from the AWS Virtual Private Gateway.
- D. Use IPsec tunnels from the AWS Transit Gateway.
Answer: D
Explanation:
The best approach to deploy Netskope for machine traffic across multiple VPCs in an AWS account with the least amount of tunnels while providing connectivity for all VPCs is to useIPsec tunnels from the AWS Transit Gateway.This method allows you to use the same Site-to-Site VPN connection to Netskope for multiple VPCs, thus minimizing the number of tunnels required12. The AWS Transit Gateway acts as a network transit hub, enabling you to connect your VPCs and on-premises networks through a central point of management and control.Using IPsec tunnels with the AWS Transit Gateway ensures that all VPCs connected to it utilize the same IPsec tunnel between the transit gateway and Netskope POP1.
Detailed guidance on configuring IPsec VPN tunnels between your AWS Transit Gateway and Netskope POPs can be found in the Netskope Knowledge Portal1.Additionally, the Netskope Community Forum provides insights on setting up IPsec Tunnels for AWS egress traffic, which includes information relevant to deploying Netskope across multiple VPCs2.
NEW QUESTION # 38
A company's architecture includes a server subnet that is logically isolated from the rest of the network with no Internet access, no default gateway, and no access to DNS. New resources can only be provisioned on virtual resources in that segment and there is a firewall that is tunnel-capable securing the perimeter of the segment. The only requirement is to have content filtering for any server that might access the Internet using a browser.
Which two Netskope deployment methods would achieve this requirement? (Choose two.)
- A. Install the Netskope Client on the servers
- B. Deploy IPsec or GRE tunnels in the segment to steer traffic from the servers to Netskope.
- C. Deploy a mobile profile on the servers.
- D. Deploy Data Plane on Premises (DPoP) with a proxy configuration on the servers.
Answer: B,D
Explanation:
For a server subnet that is isolated and requires content filtering for any server that might access the Internet using a browser, the two Netskope deployment methods that would meet this requirement are:
* B. Deploy Data Plane on Premises (DPoP) with a proxy configuration on the servers: Deploying DPoP would allow the isolated servers to connect to the Netskope cloud for content filtering through a proxy configuration.This setup would enable the servers to have controlled access to the Internet for content filtering purposes without requiring direct Internet access1.
* C. Deploy IPsec or GRE tunnels in the segment to steer traffic from the servers to Netskope: By deploying IPsec or GRE tunnels, the traffic from the servers can be securely directed to Netskope for content filtering.This method is suitable for environments where servers do not have direct Internet access, as the tunnel provides a secure path for traffic to reach Netskope's cloud services1.
These deployment methods are designed to work in environments with strict network isolation and provide the necessary content filtering capabilities for servers accessing the Internet.
The deployment methods and their suitability for isolated server subnets are based on Netskope's documentation and resources, which detail various deployment options and their use cases21.
NEW QUESTION # 39
You are troubleshooting an issue with users who are unable to reach a financial SaaS application when their traffic passes through Netskope. You determine that this is because of IP restrictions in place with the SaaS vendor. You are unable to add Netskope's IP ranges at this time, but need to allow the traffic.
How would you allow this traffic?
- A. Use Cloud Explicit Proxy so the traffic will egress from the corporate data center
- B. Use an IPsec tunnel to forward traffic so it will egress from the corporate data center
- C. Use NPAto implement Source IP anchonng so the traffic will egress from the corporate data center.
- D. Use Explicit Proxy Over Tunnel (EPoT) so the traffic will egress from the corporate data center.
Answer: A
Explanation:
To allow traffic to a financial SaaS application that is being blocked due to IP restrictions, the best option is to use Cloud Explicit Proxy. This method allows traffic to egress from the corporate data center without requiring Netskope's IP ranges to be added to the SaaS vendor's allowlist. By configuring an allowlist in the Cloud Explicit Proxy settings, you can add any source egress IP addresses for your on-premises users, and Netskope will allow the traffic from the added user and IP address without authenticating1.
NEW QUESTION # 40
Your company purchased Netskope's Next Gen Secure Web Gateway You are working with your network administrator to create GRE tunnels to send traffic to Netskope Your network administrator has set up the tunnel, keepalives. and a policy-based route on your corporate router to send all HTTP and HTTPS traffic to Netskope. You want to validate that the tunnel is configured correctly and that traffic is flowing.
In this scenario, which two statements are correct? (Choose two.)
- A. You can verify that the tunnel is up in the Netskope Trust portal at https://trust netskope.com/.
- B. You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope.
- C. You must use your own monitoring tools to verify that the tunnel is up.
- D. You can verify that the tunnel is up and receiving traffic in the Netskope Ul under Settings > Security Cloud Platform > GRE.
Answer: B,D
Explanation:
To validate that the GRE tunnel is configured correctly and that traffic is flowing to Netskope, the correct statements are:
A: You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope. This is a standard method for checking the health and activity of a GRE tunnel.
C: You can verify that the tunnel is up and receiving traffic in the Netskope UI under Settings > Security Cloud Platform > GRE. This is a feature provided by Netskope to monitor the status of GRE tunnels directly from the Netskope interface12.
Statement B is incorrect because Netskope provides its own tools for monitoring the status of the tunnel. Statement D is incorrect because the Netskope Trust portal provides information on the overall service status and updates, not specific tunnel status3.
NEW QUESTION # 41
You want customers to configure Real-time Protection policies. In which order should the policies be placed in this scenario?
- A. Threat, CASB, RBI, Web
- B. CASB, RBI, Threat, Web
- C. Threat, RBI, CASB, Web
- D. RBI, CASB, Web, Threat
Answer: D
Explanation:
When configuring Real-time Protection policies in Netskope, the recommended order is as follows:
RBI (Risk-Based Index) Policies: These policies focus on risk assessment and prioritize actions based on risk scores. They help identify high-risk activities and users.
CASB (Cloud Access Security Broker) Policies: These policies address cloud-specific security requirements, such as controlling access to cloud applications, enforcing data loss prevention (DLP) rules, and managing shadow IT.
Web Policies: These policies deal with web traffic, including URL filtering, web categories, and threat prevention.
Threat Policies: These policies focus on detecting and preventing threats, such as malware, phishing, and malicious URLs.
Placing the policies in this order ensures that risk assessment and cloud-specific controls are applied before addressing web and threat-related issues. Reference:
Netskope Security Cloud Introductory Online Technical Training
Netskope Security Cloud Operation & Administration (NSCO&A) - Classroom Training Netskope Certification Description Netskope Architectural Advantage Features
NEW QUESTION # 42
You want to verify that Google Drive is being tunneled to Netskope by looking in the nsdebuglog file. You are using Chrome and the Netskope Client to steer traffic. In this scenario, what would you expect to see in the log file?
- A.
- B.
- C.
- D.
Answer: D
Explanation:
When verifying that Google Drive traffic is being tunneled to Netskope using Chrome and the Netskope Client, you would expect to see log entries indicating that the traffic is being directed through Netskope's proxy. Specifically, Option A is correct as it shows the process "google drive" being tunneled tonsProxy. The log entry for Option A indicates that a TLS tunneling flow from a local address and process (Google Drive) is being directed to a host (play.googleapis.com) and then to Netskope's proxy (nsProxy).This is consistent with how Netskope tunnels specified traffic for security and policy enforcement1.
The expected log entries are based on the standard operation of Netskope Client and how it steers traffic to Netskope's cloud services, as detailed in Netskope's documentation1.
NEW QUESTION # 43
You created a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, but determine that the policy is too restrictive. Specifically, users are complaining that normal websites have stopped rendering properly.
How would you solve this problem?
- A. Create a Real-time Protection policy to allow the Download activity to the Amazon S3 application
- B. Create a Real-time Protection policy to allow the Browse activity to the Amazon S3 application.
- C. Create a Real-time Protection policy to allow the Download activity to the Cloud Storage category
- D. Create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category
Answer: D
Explanation:
To solve the problem of normal websites not rendering properly due to a Real-time Protection policy that blocks all activities to non-corporate S3 buckets, the best solution is to create a Real-time Protection policy to allow the Browse activity to the Cloud Storage category. This approach will enable users to view content from various cloud storage services, including Amazon S3, without allowing full access to non-corporate S3 buckets. It's a more granular and less restrictive policy that allows necessary browsing activities while still maintaining control over the upload and download activities to non-corporate buckets1.
NEW QUESTION # 44
You do not want a scheduled Advanced Analytics dashboard to be automatically updated when Netskope makes improvements to that dashboard. In this scenario, what would you do to retain the original dashboard?
- A. Copy the dashboard into your Group or Personal folders and schedule from these folders.
- B. Download the dashboard you want and Import from File into your Group or Personal folder.
- C. Create a new dashboard from scratch that mimics the Netskope dashboard you want to use.
- D. Ask Netskope Support to provide the dashboard and import into your Personal folder.
Answer: B
Explanation:
* To retain the original dashboard without automatic updates due to improvements made by Netskope, you can download the desired dashboard and then import it from a file into your Group or Personal folder.
* This approach ensures that you have a static version of the dashboard that won't be affected by future changes or enhancements. References:
* The answer is based on general knowledge of dashboard management and customization within Netskope.
NEW QUESTION # 45
Your customer is currently using Directory Importer with Active Directory (AD) to provision users to Nelskope. They have recently acquired three new companies (A. B. and C) and want to onboard users from the companies onto the NetsKope platform. Information about the companies is shown below.
- Company A uses Active Directory.
-- Company B uses Azure AD.
-- Company C uses Okta Universal Directory.
Which statement is correct in this scenario?
- A. Users from Company B and Company C cannot be provisioned because the customer is already using AD Importer.
- B. Either Company B or Company C users cannot be provisioned because integration with only one SCIM solution is allowed.
- C. Company A users cannot be provisioned to Netskope because the customer is already using AD Importer to import users from another Active Directory environment.
- D. Users from Companies A. B, and C can be provisioned to Netskope by deploying additional AD Importers and integrating more than one SCIM solution.
Answer: D
Explanation:
Users from Companies A, B, and C can indeed be provisioned to Netskope. Company A, which uses Active Directory, can continue to use the existing AD Importer. For Company B that uses Azure AD and Company C that uses Okta Universal Directory, integration with SCIM (System for Cross-domain Identity Management) solutions is possible. Netskope supports provisioning users from multiple directories, including Active Directory and cloud-based identity providers like Azure AD and Okta, by using additional AD Importers and integrating more than one SCIM solution12.
NEW QUESTION # 46
You want to see all instances of malware that were detected by the Netskope Cloud Sandbox.
Which process would you use to achieve this task in the Netskope tenant UI?
- A. Go to Incidents > Malicious Sites, and perform the detection_engine eq 'Advanced Detection' query.
- B. Go to Incidents > Malware and perform the detection_engine eq 'Netskope Cloud Sandbox' query.
- C. Go to Skope IT > Alerts, switch to Query Mode and perform the detection_engine eq 'Netskope Cloud Sandbox' query.
- D. Go to Skope IT > Page Events, switch to Query Mode and perform the detection_engine eq 'Netskope Cloud Sandbox' query.
Answer: B
NEW QUESTION # 47
You are currently designing a policy for AWS S3 bucket scans with a custom DLP profile Which policy action (s) are available for this policy?
- A. Alert, Quarantine. Block, User Notification
- B. Alert only
- C. Alert, Quarantine
- D. Alert, User Notification
Answer: C
Explanation:
When designing a policy for AWS S3 bucket scans with a custom DLP profile in Netskope, the available policy actions are Alert and Quarantine. These actions allow you to be notified when a policy violation occurs and to quarantine sensitive data to prevent potential data loss or exposure. The Alert action will notify the designated personnel or system when a match to the DLP profile is found during the scan. The Quarantine action will move the offending file to a secure location where it can be reviewed and dealt with appropriately1.
The information about policy actions for AWS S3 bucket scans is available in the Netskope documentation, which provides guidance on creating API Data Protection policies for scanning S3 buckets and the actions that can be taken when a policy is triggered1.
NEW QUESTION # 48
You need to monitor the health of configured IPsec or GRE tunnels.
In this scenario, which two methods are supported by Netskope to accomplish this task? (Choose two.)
- A. Use ICMP keepalive probing.
- B. Use Dead Peer Detection.
- C. Use Layer 4 health checks.
- D. Use Netskope Trust Portal.
Answer: B,C
NEW QUESTION # 49
What is a Fast Scan component of Netskope Threat Detection?
- A. Machine Learning
- B. Dynamic Analysis
- C. Heuristic Analysis
- D. Statical Analysis
Answer: A
Explanation:
The Fast Scan component of Netskope Threat Detection utilizes Machine Learning to quickly detect and block malware in real-time. This is part of Netskope's multi-layered security approach, which includes various engines to defend against a wide range of threats. The Fast Scan capability specifically leverages machine learning-based detection for rapid analysis and response to potential threats1.
The information regarding the Fast Scan component and its use of Machine Learning can be found in the Netskope documentation, which outlines the threat protection framework and the role of machine learning in detecting and blocking malware
NEW QUESTION # 50
You are already using Netskope CSPM to monitor your AWS accounts for compliance. Now you need to allow access from your company-managed devices running the Netskope Client to only Amazon S3 buckets owned by your organization. You must ensure that any current buckets and those created in the future will be allowed Which configuration satisfies these requirements?
- A. Steering: All Web Traffic Policy type: API Data Protection
Constraint: Storage, Bucket Does Match *@myorganization.com Action: Allow - B. Steering: Cloud Apps Only, All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Not Match -ALLAccounts Action: Block
- C. Steering: Cloud Apps Only Policy type: Real-time Protection
Constraint: Storage. Bucket Does Not Match *@myorganization.com Action: Block - D. Steering: Cloud Apps Only. All Traffic Policy type: Real-time Protection Constraint: Storage. Bucket Does Match -ALLAccounts Action: Allow
Answer: B
NEW QUESTION # 51
Your company purchased Netskope's Next Gen Secure Web Gateway You are working with your network administrator to create GRE tunnels to send traffic to Netskope Your network administrator has set up the tunnel, keepalives. and a policy-based route on your corporate router to send all HTTP and HTTPS traffic to Netskope. You want to validate that the tunnel is configured correctly and that traffic is flowing.
In this scenario, which two statements are correct? (Choose two.)
- A. You can verify that the tunnel is up in the Netskope Trust portal at https://trust netskope.com/.
- B. You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope.
- C. You must use your own monitoring tools to verify that the tunnel is up.
- D. You can verify that the tunnel is up and receiving traffic in the Netskope Ul under Settings > Security Cloud Platform > GRE.
Answer: B,D
Explanation:
To validate that the GRE tunnel is configured correctly and that traffic is flowing to Netskope, the correct statements are:
* A: You can use your local router or network device to verify that keepalives are being received and traffic is flowing to Netskope. This is a standard method for checking the health and activity of a GRE tunnel.
* C: You can verify that the tunnel is up and receiving traffic in the Netskope UI under Settings > Security Cloud Platform > GRE. This is a feature provided by Netskope to monitor the status of GRE tunnels directly from the Netskope interface12.
Statement B is incorrect because Netskope provides its own tools for monitoring the status of the tunnel. Statement D is incorrect because the Netskope Trust portal provides information on the overall service status and updates, not specific tunnel status3.
The references for these answers can be found in the Netskope Knowledge Portal, which provides detailed guidance on configuring and validating GRE tunnels12. Additionally, the Netskope Community Forum offers insights and solutions for deploying and monitoring GRE tunnels
NEW QUESTION # 52
You have an NG-SWG customer that currently steers all Web traffic to Netskope using the Netskope Client.
They have identified one new native application on Windows devices that is a certificate-pinned application.
Users are not able to access the application due to certificate pinning. The customer wants to configure the Netskope Client so that the traffic from the application is steered to Netskope and the application works as expected.
Which two methods would satisfy the requirements? (Choose two.)
- A. Configure domain exceptions in the steering configuration for the domains used by the native application.
- B. Configure the SSL Do Not Decrypt policy to not decrypt traffic for domains used by the native application.
- C. Tunnel traffic to Netskope and bypass traffic inspection at the Netskope proxy.
- D. Bypass traffic using the bypass action in the Real-time Protection policy.
Answer: B,C
NEW QUESTION # 53
Review the exhibit.
AcmeCorp has recently begun using Microsoft 365. The organization is concerned that employees will start using third-party non-AcmeCorp OneDrive instances to store company dat a. The CISO asks you to use Netskope to create a policy that ensures that no data is being uploaded to non-AcmeCorp instances of OneDrive.
Referring to the exhibit, which two policies would accomplish this posture? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C,D
Explanation:
To ensure that no data is uploaded to non-AcmeCorp instances of OneDrive, the policies that would accomplish this are:
Policy B: This policy allows traffic only for AcmeCorp's OneDrive and blocks all other Microsoft 365 Suite traffic. It ensures that data is not uploaded to non-AcmeCorp OneDrive instances by restricting access to only the corporate instance of OneDrive.
Policy C: This policy allows traffic for AcmeCorp's Microsoft 365 Suite but blocks all other OneDrive for Business traffic. It achieves the same outcome by permitting corporate suite usage while preventing uploads to any OneDrive for Business instances that are not part of AcmeCorp.
These policies are designed to provide granular control over the data flow, ensuring that company data remains within the corporate environment and is not transferred to external or personal storage solutions.
NEW QUESTION # 54
Review the exhibit.
You are attempting to block uploads of password-protected files. You have created the file profile shown in the exhibit.
Where should you add this profile to use in a Real-time Protection policy?
- A. Add the profile to a Malware Detection profile that is used in a Real-time Protection policy.
- B. Add the profile to a Constraint profile that is used in a Real-time Protection policy.
- C. Add the profile to a DLP profile that is used in a Real-time Protection policy.
- D. Add the profile directly to a Real-time Protection policy as a Constraint.
Answer: C
Explanation:
In Netskope Cloud Security, to block uploads of password-protected files, you should add the file profile to a DLP (Data Loss Prevention) profile that is used in a Real-time Protection policy. The DLP profiles in Netskope are designed to detect and protect sensitive data in real-time and at rest across the cloud environment. This approach ensures that any file matching the criteria set in the file profile, such as being password-protected, will trigger the DLP rules and prevent the upload action in real-time.
NEW QUESTION # 55
You want to enable the Netskope Client to automatically determine whether it is on-premises or off-premises. Which two options in the Netskope Ul would you use to accomplish this task? (Choose two.)
- A. the New Exception option in the Traffic Steering options of the Ul
- B. the Enable Dynamic Steering option in the Steering Configuration section of the Ul
- C. the On Premises Detection option under the Client Configuration section of the Ul
- D. the All Traffic option in the Steering Configuration section of the Ul
Answer: B,C
Explanation:
To enable the Netskope Client to automatically determine whether it is on-premises or off-premises, you can use the following options in the Netskope UI:
Enable Dynamic Steering:
This option is available in the Steering Configuration section of the UI.
By enabling dynamic steering, the Netskope Client can intelligently determine the appropriate data plane (on-premises or cloud) based on the user's location and network conditions.
It ensures that traffic is directed to the optimal data plane for improved performance and security.
Reference:
On Premises Detection:
This option is available under the Client Configuration section of the UI.
By configuring on-premises detection, the Netskope Client can identify whether it is connected to the local network (on-premises) or accessing resources from outside (off-premises).
It helps in applying relevant policies and steering traffic accordingly.
NEW QUESTION # 56
You have multiple networking clients running on an endpoint and client connectivity is a concern. You are configuring co-existence with a VPN solution in this scenario, what is recommended to prevent potential routing issues?
- A. Configure the VPN to split tunnel traffic by adding the Netskope IP and Google DNS ranges and set to Exclude in the VPN configuration.
- B. Configure a Network Location with the VPN IP ranges and add it as a Steering Configuration exception.
- C. Configure the VPN to full tunnel traffic and add an SSL Do Not Decrypt policy to the VPN configuration for all Netskope traffic.
- D. Modify the VPN to operate in full tunnel mode at Layer 3. so that the Netskope agent will always see the traffic first.
Answer: D
Explanation:
* To prevent potential routing issues and ensure that the Netskope agent consistently sees the traffic first, it is recommended to modify the VPN to operate in full tunnel mode at Layer 3.
* In full tunnel mode, all traffic from the endpoint is routed through the VPN, including traffic destined for Netskope. This ensures that the Netskope agent can inspect and apply policies to all traffic, regardless of the destination.
* Layer 3 full tunnel mode provides better visibility and control over the traffic flow, reducing the risk of routing conflicts or bypassing the Netskope inspection. References:
* The answer is based on general knowledge of VPN configurations and their impact on traffic routing.
NEW QUESTION # 57
You are deploying the Netskope Client in a multi-user VDI environment and need to determine the command to deploy the MSI.
Which three parameters are required in this scenario? (Choose three.)
- A. token=
- B. mode=peruserconfig
- C. installmode=IDP
- D. host=
- E. autoupdate=on
Answer: A,B,D
NEW QUESTION # 58
......
Updated Exam NSK300 Dumps with New Questions: https://www.itcertmagic.com/Netskope/real-NSK300-exam-prep-dumps.html
Dumps to Pass your NSK300 Exam with 100% Real Questions and Answers: https://drive.google.com/open?id=1MFPzdNuf0Q78PGQSE8SOOLgdl1e9QszM