Pass Your 300-625 Dumps as PDF Updated on 2021 With 72 Questions
Cisco 300-625 Real Exam Questions and Answers FREE
Preparation Steps to Follow
If you have already reviewed the exam blueprint, you understand that there is a lot of work to be done. Finding useful and credible information sources is a crucial point for every candidate striving to pass the Cisco 300-625 test on the first try. However, this is precisely why the vendor offers many study options that you can use to prepare with great deliberation. All in all, you can explore the following prep resources:
1. Enroll for the Official Training Course
The Configuring Cisco MDS 9000 Series Switches v3.5 course is designed to facilitate the individuals for the 300-625 exam thanks to the full coverage of the topics tested. It deals with the switches from Cisco and teaches about their proper implementation, management, and troubleshooting. After the completion of this course, the students will know how to develop scalable SANs. Moreover, they will be able to work with virtual storage area networks, role-based access control, and n-port virtualization. Regarding arrangement, this is a 4-day instructor-led training course with hands-on lab practice. It is available for anyone who wants to take the DCMDS program virtually or as a self-study variant. But it’s worth noting that the learners must be aware of the fundamentals of data storage, networking protocols, routing, and switching before enrolling for this course.
Exam Content to Explore
Each candidate has 90 minutes to write the Cisco 300-625 exam, which is only available in English and includes multiple-choice questions. There will be 60 items in total and you will need to earn at least 825 points to clear the test with flying colors. If you are ready to continue on the path of the Cisco certification, you can refer to the Pearson VUE website to schedule the exam date.
3. Management and Monitoring
Weightage – 25%
In this domain, the test-takers have to demonstrate their competency in concepts like setting up the DCNM device manager, DCNM-SAN client, and licensing options. Other topics include slow-drain analysis, RBAC configuration, and SAN telemetry streaming implementation.
NEW QUESTION 21
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. force
- C. commit
- D. clear
Answer: D
NEW QUESTION 22
Which statement accurately describes the result of disabling restrictions on oversubscription ratios on Cisco MDS 9000 Series Fibre Channel switching modules?
- A. QoS can be configured.
- B. The bandwidth allocated to shared ports is proportionate to the configured speed of the ports.
- C. The bandwidth allocation of the shared ports is equal to the lowest configured bandwidth.
- D. A port-group can contain a single port only.
Answer: B
NEW QUESTION 23
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Disable PMTU discovery.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Enable selective acknowledgment.
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 24
A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?
- A. IVR
- B. VSAN scoping
- C. zoning merge over LAN
- D. FCIP
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 25
Refer to the exhibit.
The san-user must configure FSPF on the VSAN 500, but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?
- A. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf - B. MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan - C. MDS-A(config)# role name sangroup
MDS-A(config-role)# no rule 2 - D. MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500
Answer: D
NEW QUESTION 26
DRAG DROP
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Select and Place:
Answer:
Explanation:
Section: Management and Monitoring
NEW QUESTION 27
What does an unlicensed DCNM SAN fail to display?
- A. real-time performance monitoring
- B. Fibre Channel, FCoE, and iSCSI topologies
- C. events and fault management
- D. historical performance monitoring
Answer: D
Explanation:
Section: Management and Monitoring
NEW QUESTION 28
Refer to the exhibit. An engineer is configuring Inter-VSAN routing for two Cisco MDS switches.
The FSPF cost between the switches is 500, and the Cisco MDS core virtualizes an IVR NAT domain as shown. Which statement about the topology is correct?
- A. The MDS-Core simulates an IVR NAT, and the FSPF cost is 500.
- B. The MDS-Core simulates an IVR NAT, and decreases the cost to 400.
- C. The MDS-Core simulates an IVR NAT, and increases the cost to 501.
- D. The MDS-Core simulates an IVR NAT, and increases the cost to 600.
Answer: C
NEW QUESTION 29
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two,)
- A. The engineer can configure the default switch port trunK mode
- B. The engineer can choose what will be the administrator account
- C. The engineer can configure the default zone policy.
- D. The engineer does not have the choice to enable or disable full roneset distribution
- E. The secure password standard is required.
Answer: C,E
NEW QUESTION 30
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?
- A. BASH
- B. ROMMON
- C. BIOS
- D. NX-OS
Answer: D
Explanation:
Section: Deployment
NEW QUESTION 31
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric.
Which condition must the administrator consider while configuring this feature?
- A. NTP must be configured on all devices or the configuration fails.
- B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- C. All switches on the fabric must be configured for the same password.
- D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
Answer: B
NEW QUESTION 32
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# fcsp esp manual
- B. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual - C. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gcm
MDS(config-if-fcsp)# fcsp esp manual - D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-fcsp)# mode gcm
Answer: B
Explanation:
Section: Management and Monitoring
NEW QUESTION 33
A storage network engineer must install and configure a new MDS switch in a data center network. Which two statements about available choices during the MDS switch initial setup are correct? (Choose two.)
- A. The engineer does not have the choice to enable or disable full zoneset distribution.
- B. The engineer can configure the default switch port trunk mode.
- C. The secure password standard is required.
- D. The engineer can configure the default zone policy.
- E. The engineer can choose what will be the administrator account.
Answer: D,E
NEW QUESTION 34
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on another switch.
- B. The switch has a conflicting domain ID.
- C. The fabric is locked by admin on switch-2.
- D. Hard zoning is enabled.
- E. Merge control is disabled.
Answer: C
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 35
A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?
- A. zoneset copy active-zoneset full-zoneset
- B. zoneset distribute full vsan 10
- C. zoneset import interface fc1/1 vsan 10
- D. zoneset overwrite-control vsan 10
Answer: C
NEW QUESTION 36
Refer to the exhibit.
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?
- A. permit vsan 1-1000 must be configured as rule 5
- B. permit vsan 1-1000 must be configured under the VSAN policy allow
- C. permit vsan 1-1000 must be configured under the VSAN policy deny
- D. permit vsan 1-1000 must be configured as rule 1
Answer: C
NEW QUESTION 37
Refer to the exhibit.
Refer to the exhibit. Device alias information must be merged for two fabrics. Which setting must match on both fabrics before the merge can be performed successfully?
- A. smart-zoning
- B. device-alias mode
- C. session
- D. qos
Answer: D
NEW QUESTION 38
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Disable PMTU discovery.
- B. Increase the send buffer size to 15000 KB.
- C. Increase the reset timeout.
- D. Enable selective acknowledgment.
Answer: D
NEW QUESTION 39
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on another switch.
- B. The switch has a conflicting domain ID.
- C. The fabric is locked by admin on switch-2.
- D. Hard zoning is enabled.
- E. Merge control is disabled.
Answer: C
Explanation:
Section: MDS Troubleshooting
Explanation/Reference:
NEW QUESTION 40
What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with Fibre Channel interfaces?
- A. out-of-service Fibre Channel interfaces on the SAN switch
- B. NP Port reload connected to the upstream SAN switch
- C. frames stuck in the HBA buffer of the server
- D. frames stuck in the storage system
Answer: A
Explanation:
Section: Implementation
NEW QUESTION 41
A storage network engineer is upgrading a Cisco MDS Director with dual supervisor modules.
The install command is executed on the standby supervisor module but fails.
Which action would have prevented this failure?
- A. Cisco Fabric Services must be disabled before starting the upgrade.
- B. All FCoE interfaces configured on the MDS must be shut down before starting the upgrade.
- C. The upgrade must be done on the active supervisor module only.
- D. Fabric Controller Service must be stopped before starting the upgrade.
Answer: C
NEW QUESTION 42
Which two customer challenges does Cisco DCNM address? (Choose two.)
- A. Cisco DCNM generates alerts when it detects an issue that may negatively affect service.
- B. Cisco DCNM is designed to work with Cisco Fabric Manager.
- C. Cisco DCNM proactively monitors the overall health of the data center network.
- D. Cisco DCNM Essentials Edition is capable of VM-aware monitoring, which reduces administrative overhead.
- E. Cisco DCNM is designed for enterprise customers only to increase network uptime.
Answer: A,C
NEW QUESTION 43
......
Pass Cisco 300-625 Exam Info and Free Practice Test: https://www.itcertmagic.com/Cisco/real-300-625-exam-prep-dumps.html