Latest [Sep 15, 2021] HP HPE6-A80 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning HP HPE6-A80
NEW QUESTION 10
Refer to the exhibit.
A customer needs a wired network upgrade and has complained about performance issues. The architect collected information about traffic now on several switch ports in different locations across the network, and the results are shown in the exhibit. Each of these ports is a 1Gbps port.
What can the architect conclude?
- A. Port 3 snows periods of congestion; other ports are not congested.
- B. All of the ports show serious congestion
- C. None of these ports show any periods of congestion
- D. Port 1 shows periods of congestion; other ports are not congested.
Answer: C
NEW QUESTION 11
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
The APs will he installed on the ceilings, which are about S feel (2.4 m) high.
What is one feature on the APs that can help the customer comply with PCI DSS?
- A. Anomaly-based threat detection
- B. Smart Rate ports
- C. Physical security with Kensington Security Slots
- D. User and Entity Behavior Analytics (UEBA)
Answer: B
NEW QUESTION 12
A customer has an Aruba wireless network. which includes two MC 7205s and an MM at the network core. The company now wants to accommodate 50 mobile trainers These trainers travel around the world and run training events. The trainers often need to access materials in the company data center, but cannot reach materials when they are on the road.
The company wants to give the mobile workforce a secure way to reach the materials they need no matter where they are.
including in public spaces like the hotels where they often leach. The customer also requires that the solution be as cost effective as possible while meeting the requirements.
Which plan meets the needs of the mobile Trainers?
- A. Add 50 RAPs: add 50 Enterprise licenses to the MM, and add two 7005 MCs in the DMZ.
- B. Add so PEFV licenses to the MM. and add an additional 7205 MC to the core.
- C. Add 50 RAPs; add 50 Enterprise licenses and 50 VIA licenses to the MM
- D. Add 50 VIA licenses to the MM, and deploy two 7005 MCs in the DMZ.
Answer: C
NEW QUESTION 13
A customer has an Aruba wireless netwofK with:
* Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure
* 250 APs. which support a total of 7.500 devices
* A virtual CxQCQ ClearPass appliance with 1QK Access licenses
* An MM-HW-1K appliance
The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.
Which change to the existing solution should the architect explain?
- A. A separate ClearPass virtual appliance will be required to integrate with the AQS-Switches
- B. The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.
- C. A new controller will be required to support sufficient clients, including the wired ones.
- D. The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.
Answer: B
NEW QUESTION 14
in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?
- A. The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails
- B. The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.
- C. The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.
- D. The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.
Answer: C
NEW QUESTION 15
Refer to the exhibit.
Exhibit: A49.01114316-102
The architect has determined that this building requires two 10GPE links to the data center.
What is the correct transceiver type for the links?
- A. 3FP+ LRM with mode conditioning
- B. SFP+ LRM
- C. SFP+ LR
- D. SFP+ SR
Answer: B
NEW QUESTION 16
Refer to the exhibit.
This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?
- A. about 6-4
- B. about 13-16
- C. about 6-8
- D. about 23-32
Answer: C
NEW QUESTION 17
Refer to the exhibit.
A customer needs to support resilient wireless services
What is one way that this design helps to minimize me impact of a railed access layer switch on these services?
- A. The 8400s and G405s use Virtual Switching Extension (VSX) in cone and access.
- B. The switches support Smart Rate and dual home AP connections.
- C. APS in the same area connect to different switches.
- D. Each access layer switch has two redundant links to the core.
Answer: B
NEW QUESTION 18
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?
- A. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.
- B. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
- C. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
- D. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
Answer: C
NEW QUESTION 19
Refer to the exhibit.
A customer has these availability requirements;
* loss of one controller with stateful failover and without impact on wireless client connectivity
* loss of one core switch without loss of connectivity for any endpoints or APs in the building
* loss of any one switch-lo-switch or MC-to-switch link without loss of connectivity for any endpoints or APS in the building and with minimal impact on infrastructure functionality
* loss of any one access switch with minimal impact to wireless client connectivity The exhibit shows the current plan for the topology.
Which change should the architect make to the plan to provide better support for the customers availability requirements?
- A. Add VLANs 11 and 15 to the MC connections to ensure both MCS can manage any of the APS.
- B. Use two 40GBE DACs between the core V3X switches for their switch links.
- C. Add 120 additional AP licenses, so that each MC can support ail the APs, even if the other MC fails.
- D. Change the 40GbE DAC on the 8400 switch to a stacking cable with stacking module.
Answer: C
NEW QUESTION 20
A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID's for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?
- A. RAPs and branch office controllers
- B. lAPs with Aruba central
- C. CAPS and branch office controllers
- D. IAPs with branch office controllers
Answer: B
NEW QUESTION 21
A customer has an Aruba solution with APs, MCs, and an MM The customer also uses AirWave and ClearPass. The customer wants to add Aruba CX Switches, which use per-user tunneled node, to the solution.
How should the Aruba CX Switches integrate with the existing solution in order to determine when to tunnel device traffic to MCs?
- A. They should be manually added as MDs in MM.
- B. They should be managed by AirWave with SNMPv3.
- C. They should implement authentication to ClearPass.
- D. They should be directed to MCs by a DHCP or DNS server.
Answer: D
NEW QUESTION 22
Refer to the exhibit.
A company needs a new wireless solution for its multi-site network. All branch sites must connect to the main site through secure tunnels over the Internet. The customer requires full redundancy for the Mobility Controllers (MC). Including stateful faiEoverand seamless roaming for the main site.
The architect plans to propose:
- 500 RAPS
- 100 APs at the main campus
- two 7205 MCs
- two 7210 MCS
- one MM appliance
The exhibit snows the existing wired network at the main site, which has a single building with two large floors.
Following the best-practices on design, performance and security, where should the architect plan to connect the MCs?
{Potential locations are numbered in the exhibit.)
- A. two 7205 MCS at 1; two 7210 MCS at 2
- B. one 7205 MC at 3 and one at 4; two 7210 MCs at 1
- C. two 7205 MCs at 2; two 7210 MCs at 1
- D. all of the MCs at 2
Answer: D
NEW QUESTION 23
Refer to the exhibit.
A customer needs a wireless network upgrade and has these requirements.
- Support any applications used on a wired connection
- Support up to 2500 wireless clients
- Support seamless roaming from floor to floor and building to building
- Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?
- A. Place each controller in a different VLAN and subnet.
- B. Combine the /25 subnets for wireless users into a /20 subnet
- C. Install additional Mobility Controller.
- D. Combine me /25 subnets for wireless and wired users into a /16 subnet.
Answer: C
NEW QUESTION 24
What is one piece of additional information architects should obtain from the customer before they design the wireless solution?
- A. the distance between the locations where cameras will be installed and the wiring closet on each floor
- B. the power requirements for the wireless loT devices and security cameras
- C. the average number of users per loT device
- D. the authentication and encryption capabilities for loT devices and security cameras
Answer: A
NEW QUESTION 25
An indoor sports stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of 72 feet (22 m).
* There is a catwalk around the perimeter of me stadium that is 54 feet (13 m) from me floor.
* There are two scoreboards at either end of the stadium
* The construction of the stadium is concrete and steel.
The customer has indicated a preference for overhead coverage, and the wireless network should support 3500 concurrent clients. The architect plans to install the APs on the catwalk to service sections of the floor below Which type or antennas are recommended for the APS that provide the overhead coverage?
- A. downtilt
- B. high gain omnidirectional
- C. vagi
- D. high gain directional
Answer: D
NEW QUESTION 26
A network architect plans to propose a virtual Mobility Master (VMM) tor a new solution. The solution will support up to 4.800 wireless client devices and include:
* two Virtual Mobility controllers (VMCs) in a cluster
* 180 APs
Which licenses should the architect propose?
- A. 1 MM-VA-500; 1 MC-VA-250; 180 Enterprise licenses
- B. 1 MM-VA-500; 2 MC-VA-250; 540 Enterprise licenses
- C. 1 MM-VA-IK:I MC-VA-250; 180 Enterprise licenses
- D. 1 MM-VA-1K; 2 MC-VA-25Q; one Enterprise license
Answer: C
NEW QUESTION 27
A nospltai needs an upgrade to 802.11ax for its wireless network, which needs to provide complete coverage The hospital has a concrete exterior and uses drywalls lor all of the interior walls with a few exceptions as mandated for safety The building has 10fool (3 m) ceilings.
The hospital prefers to avoid the deployment of APs in rooms if possible. Exceptions include reception areas and lounges.
The wireless network must support wireless medical devices, voice communicators for medical star, laptops in nurse stations, medical staff tablets, and visitor and patient personal devices. All of these devices support both the 2.4GHz and 5GHz band.
The exhibits below show one wing of one floor of the hospital. This wing is about 2S.Q0D square feet {2GQQ sq, m). The unlabeled rooms along the bottom of the wing are patient rooms' other rooms such as lounges and the MR] room are labeled. This area has:
* up to SO concurrent patients and visitors, who might have up to two devices
* 40 concurrent staff members, who might have up to three devices
* about 200 medical and other types of wireless devices
The architect has already planned to place APs in stairwells on another floor.
Which AP plan for this wing of this floor meets the customer needs?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION 28
......
Authentic Best resources for HPE6-A80 Online Practice Exam: https://www.itcertmagic.com/HP/real-HPE6-A80-exam-prep-dumps.html