[Jan-2022] DEA-5TT1 Dumps are Available for Instant Access using ITCertMagic
DEA-5TT1 Dumps 2022 - New EMC DEA-5TT1 Exam Questions
Dell EMC DEA-5TT1 Exam Syllabus Topics:
| Topic | Details | Weights |
|---|---|---|
| Dell EMC Switch Software, Configuration, and Management | - Explain how software is used to configure and manage Dell EMC switches, and describe the steps to complete an initial switch configuration | 7% |
| IP Routing Technologies and Routing Protocols | -Describe basic routing concepts and explain how to interpret a routing table -Identify and describe the differences between static and dynamic routing -Identify and describe the classifications of routing protocols and how they are used to route within and between autonomous systems -Explain the routing process used by RIPv2, OSPF, and BGP (link state and distance vector routing) routing protocols | 15% |
| Networks – The Basics | -Explain the purpose and function of network devices such as switches and routers, WANs and LANs, and common Campus and Datacenter topologies -Explain the purpose and basic operations of the OSI model -Describe the concepts and use cases for Layer 2 - Data Link Layer, Discovery protocols | 7% |
| Switch Stacking, Dell EMC Campus, Datacenter, and Modular Switch Portfolio | - Describe the key concepts of stacking and the hardware required to configure stacking using OS 6, OS 9, and OS 10 - Describe the switch models that are part of the Dell EMC Campus, Datacenter, and Modular Switch portfolio | 10% |
| Switching Fundamentals and Creating a Switched Network | -Explain the reason for network switching and the process of moving frames within a switched network -Explain how to differentiate between a broadcast domain and collision domain -Explain how to select cabling and the cables that are certified for network connectivity -Describe the concepts of VLANs, Spanning-Tree protocol, and Link Aggregation and how each functions within the network | 23% |
| Transport Layer | -Describe the function of the Transport layers, how it supports host-to-host connectivity, and protocols used by the Transport layers and their use cases | 7% |
| Security, Authentication, and ACLs | -Describe the options and processes of securing access to the network | 3% |
| Internet Protocol v4 and v6 | -Identify and describe the differences between private and public IP addressing, and describe classful and CIDR addressing -Describe IPv4 addressing and explain the process of using IPv4 in the network -Describe IPv6 addressing and explain the process of using IPv6 in the network | 14% |
NEW QUESTION 18
What are the Protocol Data Units (PDUs) called at the Transport layer?
- A. Packets
- B. Segment
- C. Frame
- D. Data Payload
Answer: B
NEW QUESTION 19
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?
- A. Data Link
- B. Network
- C. Physical
- D. Transport
Answer: A
NEW QUESTION 20
What accurately describes IPv6 addressing?
- A. IPv6 is used to converse IP addresses and utilize private addresses.
- B. IPv6 addresses are denoted by eight groups of four hexadecimal numbers.
- C. IPv6 uses 128 hexadecimal numbers instead of the 32 hexadecimal numbers used by IPv4.
- D. IPv6 uses broadcast addresses for neighbor discovery.
Answer: B
Explanation:
Explanation/Reference: https://en.wikipedia.org/wiki/IPv6_address#:~:text=An%20IPv6%20address%20is%
20represented,0000%3A8a2e%3A0370%3A7334\
NEW QUESTION 21
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?
- A. Forwarding
- B. Learning
- C. Blocking
- D. Listening
Answer: B
NEW QUESTION 22
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?
- A. N1700 Series switch and N1500 Series switch
- B. N1500 Series switch and N2000 Series switch
- C. N3500 Series switch and N2000 Series switch
- D. N1700 Series switch and N3500 Series switch
Answer: B
Explanation:
Reference:
https://www.dell.com/en-us/work/shop/povw/networking-os6
NEW QUESTION 23
A network administrator has a stack of four Dell EMC Networking S4800 Series switches. Each stack unit is configured with a different priority. Which switch will be elected as the management device?
- A. Switch with priority 0
- B. Switch with priority 1
- C. Switch with priority 21
- D. Switch with priority 14
Answer: B
NEW QUESTION 24
On which OSI layers do standard ACL filters operate?
- A. 2 and 7
- B. 3 and 4
- C. 2 and 3
- D. 4 and 7
Answer: B
NEW QUESTION 25
What are Network Address Translation (NAT) inside global addresses?
- A. Pubic addresses used by other networks outside of the local network
- B. Public IP addresses used by the local network to communicate with the Internet
- C. Private IP addresses used by the local network
- D. Addresses used by NAT router when sending frames to devices on the local network
Answer: B
NEW QUESTION 26
Which Border Gateway Protocol (BGP) version supports IPv6?
- A. BGPv4
- B. BGPv3
- C. BGPng
- D. BGPv2
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 27
Which type of domains are connected by a Layer 2 switch?
- A. Single collision domain and a single broadcast domain
- B. Multiple broadcast domains and multiple collision domains
- C. Single collision domain and multiple broadcast domains
- D. Multiple collision domains and a single broadcast domain
Answer: D
NEW QUESTION 28
Which port type does a Dell EMC Networking N-Series switch have for its console connection?
- A. USB B
- B. RJ-45
- C. DB9
- D. USB A
Answer: C
Explanation:
Reference:
https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/ esuprt_net_fxd_prt_swtchs/networking-n3100-series_user%27s-guide10_en-us.pdf page 197
NEW QUESTION 29
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?
Answer:
Explanation:
NEW QUESTION 30
Which IP address is in the Class B range?
- A. 100.100.90.87
- B. 192.15.48.130
- C. 126.16.20.48
- D. 191.56.44.200
Answer: D
NEW QUESTION 31
In IPv4, what is the proper conversion from binary to decimal for the number 11010010?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 32
When configuring a switch, which CLI mode only supports limited show commands?
- A. Configuration
- B. EXEC
- C. EXEC Privilege
- D. Maintenance
Answer: B
Explanation:
Reference:
https://www.dell.com/support/manuals/us/en/04/poweredge-fx2/dell%20fn%20ioa% 20config_9.8.0.0_pub-v1/cli-modes?guid=guid-aeb7d44d-2413-4da8-b8b9-2f8a26bad435&lang=en-us
NEW QUESTION 33
What accurately describes the comparison between stacking and VLT?
- A. Stacked switches share a common control plane while VLT peers maintain their own control plane.
- B. Stacked switches and VLT peers allow "single pane of glass" management by maintaining a single control plane.
- C. Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/ series is the same.
- D. VLT allows for more physical devices to appear as one virtual device than stacking does.
Answer: A
Explanation:
Reference:
https://downloads.dell.com/manuals/common/dellemcnetworking_stacking_vs_vlt.pdf Introduction section
NEW QUESTION 34
On which OSI layers do standard ACL filters operate?
- A. 2 and 7
- B. 3 and 4
- C. 2 and 3
- D. 4 and 7
Answer: B
Explanation:
Explanation
Explanation/Reference:
NEW QUESTION 35
What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?
- A. 00:C4:4F
- B. 23:AF:4A
- C. 4F:23:AF:4A
- D. 00:C4:4F:23
Answer: A
NEW QUESTION 36
Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?
- A. Frame check sequence
- B. Start frame delimiter
- C. Cyclic redundancy check
- D. Preamble
Answer: D
NEW QUESTION 37
What is the bandwidth of an RPM for a C9010 Network Director?
- A. 2.56 Tbps
- B. 200 Mbps
- C. 1.52 Tbps
- D. 2.56 Mbps
Answer: A
Explanation:
Reference:
http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/documents/ dell_networking_c9000_specsheet.pdf
NEW QUESTION 38
Which flags are used in the TCP header to initiate and end TCP connections or sessions?
- A. Initiate = Finish (FIN)
End = Synchronize (SYN) - B. Initiate = Synchronize (SYN) End = Finish (FIN)
- C. Initiate = Acknowledge (ACK) End = Finish (FIN)
- D. Initiate = Acknowledge (ACK) End = Synchronize (SYN)
Answer: B
NEW QUESTION 39
......
The Dell DEA-5TT1 exam directly relates to the certification called Associate – Networking (DCA-Networking) version 1. It signifies the candidate’s basic skills in the networking area as well as the ability to handle different tasks associated with the installation, configuration, maintenance, and troubleshooting networking products for Dell EMC. Thus, the Associate – Networking test DEA-5TT1 looks at network basics, Ethernet networking, switching essentials, the creation of switched networks, and IPv4 as well as v6, among other subjects.
EMC DEA-5TT1 Exam Practice Test Questions: https://www.itcertmagic.com/EMC/real-DEA-5TT1-exam-prep-dumps.html