HPE6-A71 Questions Pass on Your First Attempt Dumps for Aruba-ACMP Certified
HPE6-A71 Practice Test Pdf Exam Material
How to Prepare for HP HPE6-A71: Aruba Certified Mobility Professional Exam
Preparation Guide for HP HPE6-A71: Aruba Certified Mobility Professional Exam
Introduction
It was founded on November 1, 2015, as part of Hewlett Packard company’s scattering. HPE is a market-oriented organization that operates in two divisions: The Enterprise Group, which works in a range of servers, storage, networking, consultations, and services, and the Financial Service (FSS) Group, which is a leading global information technology organization, located in Santos, CA and a global leader in business technology. HPE announced annual sales of $29 billion in FY2019 on October 31, down 5,57% from the previous time of year. This exam tests your skills with the WLAN design, deployment, and troubleshooting of Aruba Mobile First Network Solutions in complex highly available campus and branch environments. It also tests your ability to configure specialized applications, management, and security requirements for a WLAN such as UCC Voice and advanced security features.
The split was arranged to change the name of the former Hewlett-Packard corporation into HP Inc. and convert it into a new business. HP kept the old HP machine and print company and its stock price background as well as the original Hewlett-Packard NYSE symbol; the Corporation trades under its ticker symbol: HPE. HP Inc. HPE’s income was marginally lower than that of HP Inc, according to the 2015 notes. In 2017, the Computer Science Company extended its Enterprise Services business to DXC technology. It also extended and combined the software business with Micro Focus. In 2018 Fortune 500, HPE was ranked No 107 among the largest US companies with total profits.
How much HP HPE6-A71: Aruba Certified Mobility Professional exam cost
HP HPE6-A71: Aruba Certified Mobility Professional exam cost is $110, for more information please visit Official Website.
NEW QUESTION 27
Refer to the exhibit.
Controllers are configured in a cluster as shown in the exhibit. These are the network details.
-AMobility Master (MM) managers the cluster.
-The cluster contains two controllers: C1 and C2.
-AP1 and AP2 use C1 as their Active AP Anchor Controller (A-AAC), with C2 as their Standby AAC (S-AAC).
-AP3 and AP4 use C2 as their A-AAC with, C1 as their S-AAC.
User1 establishes a wireless connection via AP1, where the Active User Controller (U-UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?
- A. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C1.
- B. The AP3's A-AAC switches to C2, and the user's A-UAC remains onC1.
- C. The AP3's A-AAC switches to C2, and the user's A-UAC remains on C2.
- D. The AP3's A-AAC switches to C1, and the user's A-UAC remains on C2.
Answer: C
NEW QUESTION 28
Which license type must an administrator purchase to use Spectrum Monitoring?
- A. RFP
- B. VMC
- C. PEFNG
- D. PEFV
Answer: A
NEW QUESTION 29
A VIA client tries to initially connect to corporate office controller through an intermediate firewall. However, the VPN connection fails. The administrator examines the firewall rules and determines that rules for UDP
4500 and UDP 500 are configured.
Which additional protocol must be allowed in the firewall rules to resolve this connection failure?
- A. TCP 389
- B. UDP 4500
- C. TCP 993
- D. UDP 8200
Answer: B
NEW QUESTION 30
An administrator wants to use AirWave to manage the configuration policy settings of a set of ArubaOS-Switches. Where should the administrator perform this action?
- A. in AMP Setup
- B. in APs/Devices
- C. in Device Setup
- D. in Groups
Answer: D
NEW QUESTION 31
Refer to the exhibit.
What is true about the configuration shown in the exhibit?
- A. This is an ArubaOS controller configured for per-user tunneled node.
- B. This is an ArubaOS-Switch configured for per-port tunneled node.
- C. This is an ArubaOS controller configured for per-user tunneled node.
- D. This is an ArubaOS-Switch configured for per-user tunneled node.
Answer: B
NEW QUESTION 32
An administrator at Campus A manages Aruba Mobility Controllers (MCs).The administrator defines a server group that includes a local ClearPass server and a remote Microsoft RADIUS server. The ClearPass server has the credentials for users at Campus A and the Microsoft RADIUS server has the credentials for users at Campus B.Users at Campus A successfully authenticate and connect to the Campus A wireless network.
However, when users from Campus B visit Campus A they fail authentication.
What can the administrator do to solve this problem?
- A. Enable EAP termination on the ClearPass server.
- B. Enable machine authentication on the Mobility Controllers.
- C. Enable EAP-TTLS with EAP Termination on the Mobility Controllers.
- D. Enable FastConnect on the CampusA Mobility Controllers.
Answer: D
NEW QUESTION 33
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Configure thesame AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- B. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
- C. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- D. Have the MultiZone APs initially boot from the standalone controller in the data zone.
Answer: A
NEW QUESTION 34
An administrator wants to temporarily deny login access to users who fail 802.1x authentication functions three or more times. Which process will the administrator need to configure?
- A. EAP termination
- B. fail through
- C. captive portal
- D. blacklisting
Answer: D
NEW QUESTION 35
Refer to the exhibit.
An administrator examines theconfiguration of an AP from apboot mode shown in the exhibit.
What can the administrator determine from the configuration?
- A. RAP terminated on a Mobility Master.
- B. AP terminated on a non-cluster Mobility Controller.
- C. RAP terminated on a stand-alone controller.
- D. AP terminated on a Mobility Controller in a cluster.
Answer: D
NEW QUESTION 36
What is true about the operation of the Aruba Mobility Controller (MC) shown below?
- A. The disaster recovery mode is disabled, and changes will be sent to the Mobility Master.
- B. The disaster recovery mode is enabled, and changes will be sent to the Mobility Master.
- C. The disaster recovery mode is enabled, and no changes will be forwarded to the Mobility Master.
- D. The Mobility Master is in disaster recovery mode and will push changes to a Managed Controller.
Answer: C
NEW QUESTION 37
An administrator stages an AP and re-provisions it as a RAP from the Mobility Master (MM). When re-provisioning the RAP, the administrator must enter a user's credentials. What is the purpose of these credentials?
- A. to authenticate users on wireless ports
- B. to authenticate users on wired ports
- C. to authenticate the RAP device
- D. to authenticate users on wired and wireless ports
Answer: C
NEW QUESTION 38
Refer to the exhibit.
Once connected to a WLAN, a user cannot reliably access resources in a company's network. Based on the output shown in theexhibit, what can be determined about the user's connection?
- A. The user is connected to a controller through use of the VIA client.
- B. The user is connected wirelessly to acontroller.
- C. The user has successfully authenticated through use of PEAP.
- D. The user is connected to an ArubaOS-Switch.
Answer: D
NEW QUESTION 39
An administrator sets up a cluster of Aruba Mobility Controllers (MCs). What can the administrator determine about the cluster from the command output shown below?
- A. This is an L2-connected cluster.
- B. User load balancing is enabled.
- C. AP load balancing is enabled.
- D. This is an L3-connected cluster.
Answer: C
NEW QUESTION 40
Refer to the exhibit.
An administrator implements the MultiZone feature. The administrator sets up five zones as shown inthe exhibit in this configuration:
-Zone A has six controllers that form a cluster.
-Zone B has three controllers that from a cluster.
-Zones C, D, and E have a single standalone controller each.
A total of 13 VAPs are created across the five zones. Aruba Mobility Controllers (MCs) in Zones A, B and C run ArubaOS 8.1.0.1 MCs in zones D and E run ArubaOS 8.1.0.2. Some APs do not join their respective data zones.
What could cause this problem?
- A. The number of VAPs exceeds the maximum for MultiZone.
- B. The number of zones exceeds the maximum for MultiZone.
- C. The MCs run different versions of the ArubaOS code.
- D. The number of controllers exceeds the maximum for MultiZone.
Answer: C
NEW QUESTION 41
An administrator hasArubaOS-Switches that support tunneled node. The administrator wants to tunnel all user traffic from the Ethernet ports on the switches, and have the controllers authenticate the user traffic and apply the appropriate user role.
Which implementation meetsthese requirements?
- A. Per-port tunneled node with the controllers configured for standalone mode
- B. Role-based tunneled node with the controllers configured for standalone mode
- C. Per-port tunneled node with the controllers configured in a cluster
- D. Role-based tunneled node with the controllers configured in a cluster
Answer: D
NEW QUESTION 42
Refer to the exhibit.
An administrator supports a RAP at a branch office shown in the exhibit. The company has one Mobility Controller (MC) at the Primary DMZ site and one at the Secondary DMZ site. TheRAP is configured to connect to only the MC at the Primary DMZ site. A network outage with the ISP at the Primary DMZ site causes the RAP to reboot. Upon reboot, the RAP cannot build a tunnel to the Secondary DMZ site MC because the administrator forgot toadd the Second LMS IP address to the AP Group configuration. Once the RAP can successfully connect, the administrator can add the Secondary DMZ MC as a backup LMS to fix the AP Group.
What should the administrator implement to allow the RAP to connect tothe MC at the Secondary DMZ site while the outage at the primary site persists?
- A. Dynamic discovery through DHCP Option 60
- B. Dynamic discovery through DHCP Option 43
- C. Static configuration from apboot mode
- D. Dynamic discovery through multicast ADP
Answer: C
NEW QUESTION 43
Which forwarding mode is used for a WLAN if a RAP needs to decrypt all user traffic and forward it locally?
- A. Bridge
- B. Decrypt-tunnel
- C. Split-tunnel
- D. Tunnel
Answer: B
NEW QUESTION 44
Refer to the exhibit.
An administrator implements an L2 cluster of Aruba Mobility Controllers (MCs) as shown in the exhibit. An external RADIUS AAA server authentication clients associated with the Active User Anchor Controller (A-UAC), where the NAS IP address sent from Controller B is 10.254.1.2.
By default, what happens to the user's session when it is handed over to the Standby UAC (S-UAC) after a failover?
- A. The user's session is disconnected and has to reconnect, but the S-UAC automatically updates the NAS-IP address on the AAA server to record the event.
- B. The user's session remains active, but the AAA server cannot implement RADIUS Change of Authorization (CoA).
- C. The user's session is disconnected and has to reconnect, and no record of this process is stored on the AAA server.
- D. The user's session remains active and RADIUS messages can still be processed between the S-UAC and AAA server.
Answer: D
NEW QUESTION 45
An administrator manages an Aruba wireless network. ClearPass is used to centralize AAA functions. The administrator wants to implement server role derivation.
Which information will the ClearPass server return in regards to the user role assignment?
- A. Aruba VSA Firewall-Role
- B. RADIUS VSA User-Role
- C. RADIUS VSA Firewall-Role
- D. Aruba VSA Aruba-User-Role
Answer: B
NEW QUESTION 46
An administrator creates a cluster of four Mobility Controllers (MCs). When the administrator verifies the cluster operation, the administrator notices that it is operating as an L3-connected cluster.
What should the administrator do to ensure that the cluster operates as an L2-connected cluster? (Choose two.)
- A. Exclude all VLANs that are not trunked to each Mobility Controller.
- B. Verify VLAN configuration on the switch trunks that interconnects the Mobility Controllers.
- C. Configure a separate VRRP group for each cluster member.
- D. Include all IP addresses in the same subnets shared by the Mobility Controllers.
- E. Ensure that the controller IP addresses are in the same subnet.
Answer: A,E
NEW QUESTION 47
An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?
- A. Have the MultiZone APs initiallyboot from the standalone controller in the data zone.
- B. Configure the same AP Group in the data zone as it is in the primary zone, and configure the VAPs in the data zone.
- C. Configure the same AP Groups and VAPs on the standalone controller, and associate the MultiZone APs to both groups.
- D. Create different AP groups and VAPs on the Mobility Master and standalone controllers, and associate the MultiZone APs to both groups.
Answer: D
NEW QUESTION 48
An administrator wants to implement 802.1X authentication on Ethernet ports on branch office controllers.
What must the administrator do to implement this policy?
- A. Define the port as untrusted, and assign an AAA policy to the VLAN.
- B. Define theport an untrusted, and assign an AAA policy to the port.
- C. Define the port as trusted, and assign an AAA policy to the port.
- D. Define the port as trusted, and assign an AAA policy tothe VLAN.
Answer: D
NEW QUESTION 49
An administrator deploys a RAP at a branch office. The RAP should send all employee corporate traffic to the Mobility Controller (MC) and Internet traffic should stay local.
Which forwarding mode should the administrator configure for the employee WLAN to allow for this forwarding?
- A. Bridge
- B. Tunnel
- C. Decrypt-tunnel
- D. Split-tunnel
Answer: D
NEW QUESTION 50
An administrator manages an AirWave Management Platform (AMP). The AMP server receives many SNMP traps from managed devices, but no alerts are generated on the AMP for certain critical traps.
Which rule should the administrator create to cause the AMP server to generate an alert based on receipt of a critical SNMP trap from an Aruba Mobility Controller (MC)?
- A. Alert rule
- B. Trigger rule
- C. SNMP trap rule
- D. AMON rule
Answer: B
NEW QUESTION 51
An administrator has a cluster ofAruba Mobility Controllers (MCs). The administrator wants to manually reboot one of the controllers.
Before rebooting, which command should the administrator use to move the APs?
- A. active-ap-lb
- B. active-ap-rebalance
- C. apmove
- D. lc-cluster move ap
Answer: D
NEW QUESTION 52
......
HP HPE6-A71 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
| Topic 14 |
|
| Topic 16 |
|
| Topic 17 |
|
| Topic 18 |
|
HPE6-A71 [Jan-2022] Newly Released] Exam Questions For You To Pass: https://www.itcertmagic.com/HP/real-HPE6-A71-exam-prep-dumps.html