Get instant access to C_ARSUM_2102 Practice Tests 2021 Free Updated Today! [Q46-Q71]

Share

Get instant access to C_ARSUM_2102 Practice Tests 2021 Free Updated Today!

Welcome to download the newest PassLeader C_ARSUM_2102 PDF dumps ( 82  Q&As)

NEW QUESTION 46
Your customer needs to prevent suppliers from participating in sourcing events until they are qualified in the corresponding category.
Which SAP Ariba Supplier Management solution do you suggest?

  • A. SAP Ariba Supplier Information and Performance Management
  • B. SAP Ariba Supplier Risk
  • C. SAP Ariba Supply Chain
  • D. SAP Ariba Supplier Lifecycle and Performance

Answer: D

 

NEW QUESTION 47
Where should you create a new KPI according to SAP Ariba's best practice?

  • A. In a project-level master scorecard
  • B. In your personal workspace
  • C. In the sourcing library
  • D. In an SAP Ariba Supplier Information and Performance Management template

Answer: C

 

NEW QUESTION 48
Your customer needs to adjust the scoring weight for a KPI based on contractual standards with a particular supplier.
Where should you edit the scoring based on SAP Ariba 's best practice?

  • A. In the template-level master scorecard
  • B. In the sourcing library
  • C. In the project-level master scorecard
  • D. In the project-level period scorecard

Answer: C

 

NEW QUESTION 49
Which of the following is a characteristic of master documents?

  • A. They can only be edited before the final recurrence begins.
  • B. Changes made to master documents affect all future documents in the project.
  • C. Master document surveys can be published as the first recurrence.
  • D. The master document folder title contains the date the project was initiated.

Answer: B

 

NEW QUESTION 50
You customer stores on-time delivery data from an external system in SAP Ariba using a custom fact table. How do you use the data in an SAP Ariba Supplier Performance Management project?

  • A. Add a report-based KPI into a scorecard.
  • B. Add a link to the custom fact report on the Documents tab.
  • C. Add a question about the data into a survey.
  • D. Add the custom fact report as an informational item in a scorecard.

Answer: C

 

NEW QUESTION 51
Which Weight Values attributes should be considered when you set up a scoring in a survey?

  • A. The values define a section 's relative importance within the survey.
  • B. The values determines a question 's relative importance within its section.
  • C. The values for the entire survey must add up to 100.
  • D. The values within each section must add up to 100.

Answer: B

 

NEW QUESTION 52
Phases enable you to perform which of the following activities?
Note: There are 2 correct answers to this question.

  • A. Send an overdue notification when the phase due date has passed.
  • B. Organize tasks according to your business model.
  • C. Add the phase due date to the user's dashboard calendar.
  • D. Specify task due dates relative to the start of the parent phase for a task.

Answer: C

 

NEW QUESTION 53
Which benefit is offered by the matrix-based supplier management in SAP Ariba Supplier Lifecycle and Performance?

  • A. Provide a self-service portal for suppliers that includes a table of questionnaire due for response
  • B. Assessment of multiple supplier relationships using a matrix of KPIs
  • C. Validation of supplier tax IDs and DUNS numbers against a pre-defined list
  • D. Management of suppliers based on a combination of commodities, regions, and business units

Answer: D

 

NEW QUESTION 54
Your customer is evaluating their options for the format of the supplier request form.
Based on SAP Ariba 's best practice, why do you recommend a form?

  • A. Because the questions required to submit a request will be the same for all suppliers
  • B. Because different content documents can be incorporated depending on the supplier's categories and regions
  • C. Because the request process is designed to collect only basic information from an internal user
  • D. Because the supplier request process is designed to collect highly specific information from the supplier u contact

Answer: C

 

NEW QUESTION 55
You configure a template to appear for, the region of North America, as well as any countries that reside within it.
How is the visibility condition created?

  • A. Create a field match for region is equal to North America and apply the ALL OF operator.
  • B. Create a field match for region and apply IS EQUAL TO operator for North America.
  • C. Create a field match for region and choose operator IS CHILD OF for North America.
  • D. Create a field match for region is equal to North America and apply the ANY OF operator.

Answer: C

 

NEW QUESTION 56
Which features are available to you within task details?
Note: There are 2 correct answers to this question.

  • A. Delegation history
  • B. Notification profile
  • C. Sub-tasks
  • D. Predecessors

Answer: B,D

 

NEW QUESTION 57
Your customer recently qualified a supplier for IT services in Europe. Which of the following actions can take place now?
Note: There are 2 correct answers to this question.

  • A. The supplier can be disqualified for all commodities in Europe.
  • B. The supplier can be disqualified for IT services in Germany.
  • C. The supplier can be designated as preferred for IT services in the United Kingdom.
  • D. The supplier can be designated as preferred for all commodities in the United Kingdom.

Answer: B,C

 

NEW QUESTION 58
For SAP Ariba Supplier Information and Performance Management (classic architecture), which SAP Ariba modules can provide data for the supplier 360° report?
Note: There are 3 correct answers to this question.

  • A. SAP Ariba Sourcing
  • B. SAP Ariba Spend Analysis
  • C. SAP Ariba Contracts
  • D. SAP Ariba Supply Chain
  • E. SAP Ariba Discovery

Answer: A,B,C

 

NEW QUESTION 59
The SAP Ariba Supplier Management portfolio consists of which solutions?
Note: There are 3 correct answers to this question.

  • A. SAP Ariba Supplier Risk
  • B. SAP Ariba Network Supplier Services
  • C. SAP Ariba Supplier Information and Performance Management
  • D. SAP Ariba Supplier Lifecycle and Performance
  • E. SAP Ariba Supply Chain Collaboration

Answer: A,C,D

 

NEW QUESTION 60
You need to use the SM Administration area to configure integration between SAP Ariba Supplier Lifecycle and Performance and an external system. Which system group do you require?

  • A. SM ERP Admin
  • B. Preferred Supplier Manager
  • C. SM Ops Admin
  • D. Supplier Request Manager

Answer: C

 

NEW QUESTION 61
You are creating a new SAP Ariba Supplier Performance Management template from scratch. What does SAP Ariba recommend to include?
Note: There are 3 correct answers to this question.

  • A. Recurrence phase
  • B. Scorecard document
  • C. SPM analysis report
  • D. Survey document
  • E. Folder

Answer: B,D,E

 

NEW QUESTION 62
When does the Registration tile initially appear in the supplier 360° profile?

  • A. When the supplier registration is pending approval.
  • B. When the supplier request is submitted.
  • C. When the supplier request is approved.
  • D. When the supplier registration is approved.

Answer: C

 

NEW QUESTION 63
Where can you store reports in an SAP Ariba Supplier Information and Performance Management project?

  • A. On the Tasks tab
  • B. On the Message Board tab
  • C. On the Overview tab
  • D. On the documents tab

Answer: D

 

NEW QUESTION 64
Your customer uses the region hierarchy and buyer category assignments pictured in the screenshot below:

  • A. User D (Los Angeles Metro)
  • B. User A (North Amterica)
  • C. User C (California)
  • D. User B (United Staats)

Answer: C

 

NEW QUESTION 65
In Sap Ariba Supplier Lifecycle and Performance, which of the following templates are available?
Note: There are 3 correct answers to this question.

  • A. Supplier Workspace
  • B. Supplier Registration
  • C. Supplier Profile Questionnaire
  • D. Supplier Request
  • E. Supplier Qualification

Answer: B,D,E

 

NEW QUESTION 66
Your customer has a requirement for supplier users to receive a notification to update their profiles on an annual basis within SAP Ariba Supplier Information and Performance Management (classic architecture). What is SAP Ariba's best practice?
Note: There are 2 correct answers to this question.

  • A. Create an update phase with an annual recurrence.
  • B. Specify that supplier profile updates are required in the supplier profile questionnaire.
  • C. Add a notification task to send a reminder to the supplier users.
  • D. Add the supplier as a notification recipient in the profile update task.

Answer: B,D

 

NEW QUESTION 67
You 've built the user matrix. While testing you notice a user is being added to a project. However, their region and commodity do NOT match what the project required. What is causing this behaviour?
Note: There are 2 correct answers to this question.

  • A. The user's group assignments overrule the user matrix.
  • B. The commodity code has a custom domain.
  • C. The user is assigned to the parent commodity in the project.
  • D. The region in the project is a child of the one the user is assigned to.

Answer: C,D

 

NEW QUESTION 68
Which of the following abilities are specific for an advanced approval flow?
Note: There are 3 correct answers to this question.

  • A. Add conditions to approval nodes.
  • B. Associate multiple documents to the approval task.
  • C. Assign approvers using approver lookup tables.
  • D. Combine serial and parallel flow types.
  • E. Specify project groups and system groups.

Answer: A,C,D

 

NEW QUESTION 69
Which actions can you perform in the category status area?
Note: There are 2 correct answers to this question.

  • A. Run a report which displays all suppliers for that category.
  • B. View current preferred category status information.
  • C. Launch a sourcing event for that category status information.
  • D. Request a preferred category status change.

Answer: B,D

 

NEW QUESTION 70
Your customer wants all users within a system group or project group to approve a new supplier. Which of the following is a limitation with a simple approval rule for SAP Ariba Supplier Information and Performance Management?

  • A. System groups CANNOT contain users.
  • B. The system will accept the approval from a single user.
  • C. Project Group members must be assigned using a team member rules file.
  • D. Only one user can be added as an approver in a simple approval rule.

Answer: B

 

NEW QUESTION 71
......

Sep-2021 Latest ITCertMagic C_ARSUM_2102 Exam Dumps with PDF and Exam Engine: https://www.itcertmagic.com/SAP/real-C_ARSUM_2102-exam-prep-dumps.html