Cisco 010-151 Test Engine Dumps Training With 138 Questions [Q37-Q55]

Share

Cisco 010-151 Test Engine Dumps Training With 138 Questions

010-151 Questions Pass on Your First Attempt Dumps for CCT Data Center Certified

NEW QUESTION 37
Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?

  • A. any-to-any
  • B. any-to-many
  • C. one-to-one
  • D. many-to-any
  • E. one-to-any
  • F. any-to-one

Answer: A

 

NEW QUESTION 38
What is Platform as a Service?

  • A. It is the software development framework and components delivered over the network on a pay-as-you-go basis.
  • B. It configures, manages and develops networking environment for your application.
  • C. It is where servers and virtual machines (VMs), network and storage are delivered over the network on a pay-as-you-go basis.
  • D. It is when an application service is delivered over the network on a subscription basis.

Answer: A

 

NEW QUESTION 39
What is the maximum number of supervisor modules that the Cisco MDS 9710 Switch supports?

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: B

 

NEW QUESTION 40
Refer to the exhibit.

Which item does F represent?

  • A. HDD 1
  • B. CPU 2
  • C. TFP Module
  • D. SuperCap Module
  • E. CMOS Battery

Answer: B

 

NEW QUESTION 41
Which fiber optic cable type is used most often with a Subscriber connector?

  • A. multi-mode
  • B. single-mode
  • C. subscriber-mode
  • D. straight-mode
  • E. dual-mode

Answer: B

 

NEW QUESTION 42
Which command can be used to exit to EXEC mode from this current mode? switch(config-if) #

  • A. end
  • B. Ctrl-L
  • C. exit
  • D. quit
  • E. Ctrl-C

Answer: A

 

NEW QUESTION 43
Which command-line interface mode is best described by this prompt?
UCS-switch-A (nxos)#

  • A. EXEC mode
  • B. maintenance mode
  • C. local management mode
  • D. global configuration mode
  • E. Cisco IOS mode

Answer: A

 

NEW QUESTION 44
Refer to the exhibit.

Which item does 3 represent?

  • A. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
  • B. Operate as 40-Gbps QSFP+ ports or as 4 * 10-Gbps SFP+ breakout ports
  • C. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
  • D. Operate as dedicated 40-Gbps, QSFP+ uplink ports.

Answer: D

 

NEW QUESTION 45
A company wants to build a data center infrastructure which can provide up to 99.982% uptime availability per year. Which ANSI/TIA-942 data center tier meets the requirement?

  • A. Concurrently maintainable site infrastructure
  • B. Redundant-distribution site infrastructure
  • C. Basic site infrastructure
  • D. Redundant-capacity component site infrastructure

Answer: A

Explanation:
Explanation/Reference: https://www.doc.ic.ac.uk/~jgiceva/teaching/ssc18-cloud.pdf page 16

 

NEW QUESTION 46
Refer to the exhibit.

Which call-out accurately shows the current running version of the Cisco UCS Manager management software?

  • A. D - Kernel running version 4.2(1)N(1.4m)
  • B. B - IO Module 1 running version 1.4(1m)
  • C. A - UCS Manager running version 1.4(1m)
  • D. C - Interface Card 1 running version 1.4(1m)

Answer: C

 

NEW QUESTION 47
Which cable is used to access the command-line interface of a Cisco UCS 6120XP Fabric Interconnects?

  • A. console cable
  • B. KVM cable
  • C. SFP+ Ethernet transceiver cable
  • D. Ethernet cable

Answer: A

 

NEW QUESTION 48
Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

  • A. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.
  • B. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.
  • C. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.
  • D. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

Answer: D

 

NEW QUESTION 49

Refer to the exhibit. Which statement correctly identifies the hardware features on the Cisco Nexus 9500 Series supervisor A modules?

  • A. A is Optical port; B is USB port; C is 10/100/1000 Management port; D is external clock input
  • B. A is 10/100/1000 Management port; B is USB port; C is Console port; D is external clock input
  • C. A is Console port; B is USB port; C is 10/100/1000 Management port; D is external clock input
  • D. A is Console port; B is USB port; C is 10/100/1000 Management port; D is Diagnostic port

Answer: C

Explanation:

Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white- paper-c11-729987.html

 

NEW QUESTION 50
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #

  • A. end
  • B. Ctrl-L
  • C. exit
  • D. quit
  • E. Ctrl-C

Answer: A

 

NEW QUESTION 51
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

  • A. Virtual Ethernet Module
  • B. Virtual Memory Controller Module
  • C. Virtual Supervisor Module
  • D. Virtual Network Module
  • E. Virtual Fiber Channel Module

Answer: A,C

 

NEW QUESTION 52

Refer to the exhibit. Which item does 3 represent?

  • A. Operate as port lane switch button, port lane LEDs, and Layer 1 and Layer 2 ports.
  • B. Operate as 40-Gbps QSFP+ ports or as 4 x 10-Gbps SFP+ breakout ports
  • C. Operate as 40-Gbps QSFP+ ports, and support QSA adapters to provide 1-Gbps to 10-Gbps operation
  • D. Operate as dedicated 40-Gbps, QSFP+ uplink ports.

Answer: D

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/hw/6300-install- guide/6300_Series_HIG/6300_Series_HIG_chapter_01.html

 

NEW QUESTION 53
Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)

  • A. CIMC
  • B. Fabric Interconnect firmware
  • C. LAN on Motherboard
  • D. Cisco UCS Manager
  • E. System BIOS

Answer: A,C,E

 

NEW QUESTION 54
Storage virtualization is commonly used for SANs in data centers to scale out the storage resources. The common methods of storage virtualization include array-based storage virtualization. What are the other two methods? (Choose two.)

  • A. Network-based storage virtualization
  • B. Hypervisor-based storage virtualization
  • C. Embedded-based storage virtualization
  • D. Host-based storage virtualization
  • E. Switch-based storage virtualization

Answer: A,D

 

NEW QUESTION 55
......

010-151 Practice Test Pdf Exam Material: https://www.itcertmagic.com/Cisco/real-010-151-exam-prep-dumps.html

010-151 Answers 010-151 Free Demo Are Based On The Real Exam: https://drive.google.com/open?id=1-cNvQ3xgrrz2QG3dlvRJEtD9AbdEfu3T