[Aug-2021] Pass Cisco 500-920 Exam in First Attempt Guaranteed!
Full 500-920 Practice Test and 42 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 12
What three options should be verified, when you are able to connect to Cisco UCS Manager, but unable to open a KVM session to a blade? (Choose three)
- A. Verify the KVM IP Address is on the same subnet as the Fabric Interconnect management address
- B. Confirm the IP Address assigned to the KVM is not a duplicate IP
- C. Confirm the KVM IP Address is added to the route table in Cisco UCS Manager
- D. Confirm the IP Address assigned to UCS Manager is the same as the KVM address
- E. Verify TCP port 2068 is not blocked by an ACL or Firewall
- F. Verify the KVM IP Address is on the same ip subnet as the virtual machines
Answer: B,C,E
NEW QUESTION 13
Which are two Application Gateways primary roles? (Choose two )
- A. Automate updates to the XML Database
- B. Communicate with end points and report their health and state
- C. Manage configuration changes during FSM transitions
- D. Manage configuration changes made with UCS Manager
- E. Communicate with virtual machines and report health and state
Answer: A,C
NEW QUESTION 14
The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2 What is the location of the blade that has veth 705 associated to it?
- A. There is not enough information
- B. Chassis 1. Slot 2
- C. Chassis 3. Slot 2
- D. Chassis 3, Slot 1
Answer: D
NEW QUESTION 15
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )
- A. L2 > L1
- B. L1 > L1
- C. L2 > L2
- D. L1 > L2
Answer: B,C
NEW QUESTION 16
Which two formats can be configured for Cisco's Call Home email message? (Choose two )
- A. JSON
- B. Full text
- C. CSV
- D. XML
Answer: B,D
Explanation:
Call Home Message Formats The Call Home feature offers the following message formats: * Short Text - Suitable for pagers or printed reports. * Plain Text - Full formatted message information suitable for human reading. * XML - Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf
NEW QUESTION 17
Which two components are required when the integration of Cisco UCS C-series servers within a Cisco UCS Manager Direct Connect mode? (Choose two )
- A. Compatible Cisco UCS Manager version
- B. Compatible UCS 6200 or 6300 Fabric Interconnects
- C. Cisco Management Controller
- D. Compatible Cisco Nexus Fabric Extenders
- E. Compatible UCS VIC adapter installed via the server's PCIe or MLOM slot
Answer: B,E
NEW QUESTION 18
Which are two benefits of integrating Cisco UCS C-series servers with Cisco UCS Manager? (Choose two ) Cisco UCS Manager provides the ability to automatically update C-series firmware and device drivers from a single global interface.
- A. Cisco UCS Manager uses service profiles and resource pools to allow the deployment of multiple servers with a single common template
- B. Cisco UCS Manager is able to act as a common centralized management platform for both blade and rack servers in a single domain.
- C. Cisco UCS Manager provides the ability to manage C-series in multiple physical domains from a single global interface
- D. Cisco UCS Manager can automatically power on and off servers to scale elastically according to application performance demands
Answer: B
NEW QUESTION 19
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
- B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- C. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
Answer: C
NEW QUESTION 20
An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?
- A. The overvoltage condition event will not be recorded in the SEL.
- B. The oldest entry in the SEL will be overwritten by the overvoltage condition event
- C. The newest entry in the SEL will be overwritten by the overvoltage condition event.
- D. The SEL is not used to record server related events, such as overvoltage conditions.
Answer: A
NEW QUESTION 21
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )
- A. Cisco Fabric Interconnects
- B. VIC Cards and Fiber Channel HBAs
- C. RAID Controllers
- D. Cisco UCS Manager
Answer: A,B
NEW QUESTION 22
What is the likely cause of an intermittent SAN Boot fails?
- A. LUN ID Mismatch
- B. FCoE used instead of FC
- C. Misconfigured SAN boot target in the boot policy of the service profile
- D. Wrong boot order in the service profile
Answer: C
NEW QUESTION 23
What is the result of enabling the Core File Exporter in UCS Manager?
- A. A core dump file will be immediately created and transmitted using HTTP protocol
- B. A core dump must be remotely activated by Cisco TAC.
- C. A core dump will immediately be generated and will be exported
- D. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
Answer: C
NEW QUESTION 24
In order to create an Inband Profile for Cisco Integrated Management Controller (IMC) connectivity, what do you need to perform first?
- A. Create an IPMI Policy
- B. Create a Management IP Pool, a MAC Address Pool, and a VLAN Pool
- C. Create a Management IP Pool, a VLAN. and a VLAN Group
- D. Create a Service Profile
- E. Create different VLANs, with different VLAN IDs
Answer: D
NEW QUESTION 25
Which two interfaces allow access to Cisco UCS Manager? (Choose two )
- A. Cisco IMC
- B. Cisco UCS Manager GUI
- C. Cisco UCS Manager XML API
- D. Cisco KVM
Answer: B,C
NEW QUESTION 26
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?
- A. HIF. SIF, VIF, UIF NIF
- B. VIF, UIF, HIF, NIF SIF
- C. HIF. NIF, UIF, VIF SIF
- D. VIF, UIF, HIF, SIR NIF
Answer: D
NEW QUESTION 27
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server does not have a service profile assigned, but has been discovered by UCS Manager
- B. The server has a service profile assigned, but has connectivity issues with UCS Manager
- C. The server is not properly connected
- D. The server has been properly connected, but has not been discovered by UCS Manager
Answer: C
NEW QUESTION 28
......
Get Latest 500-920 Dumps Exam Questions in here: https://www.itcertmagic.com/Cisco/real-500-920-exam-prep-dumps.html