[Apr 09, 2022] Free Network Appliance NCSE NS0-592 Exam Question
NS0-592 dumps & Network Appliance NCSE sure practice dumps
NetApp NS0-592 Exam Topics:
| Section | Objectives |
|---|---|
| Protocols | -Demonstrate knowledge of ONTAP NAS configurations -Demonstrate knowledge of ONTAP SAN configurations |
| Hardware | -Demonstrate knowledge of hardware troubleshooting -Demonstrate knowledge of troubleshooting SP or BMC -Describe the hardware components in a Fibre Channel environment -Demonstrate knowledge of the cluster interconnect infrastructure -Describe MetroCluster configurations |
| Software-defined ONTAP Solutions | -Describe software-defined ONTAP solutions |
NEW QUESTION 33
A customer is attempting to move from NFSv3 to NFSv4.x and reports that all attempts to mount using NFSv3 continue to be successful, however, all of their NFSv4.x mount attempts fail with an "access denied" error.
Which two statements would cause this error? (Choose two.)
- A. The export policy applied to the data volume does not allow clients to access it using NFSv4.
- B. The export policy applied to the SVM's root volume does not allow the NFSv4 clients to access it.
- C. The SVM's root volume allows execute access for all users.
- D. The NFS server does not have NFSv4 enabled.
Answer: A,C
NEW QUESTION 34
When you issue a volume clone create command, which entity in WAFL is copied?
- A. the vol_info block
- B. the data block
- C. the inode file
- D. the buftree
Answer: C
NEW QUESTION 35
Click the exhibit button.
You are troubleshooting a system in which the customer reports that aggregates on Stack 6c/12b are having slow response tomes from system NETAPP1CLUS-02.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. PHY 2 is running at six gigabits per second; on system NETAPP1CLUS-02, reseat IOM6 Module A on Shelf 10.
- B. The aggregates have only PHY at six gigabits per second on 12b.
- C. The shelf module firmware is downrev; on system NETAPP1CLUS-02, replace IOM6 Module A on Shelf 10.
- D. The aggregates have only one PHY running at six gigabits per second on 6c.
Answer: C,D
NEW QUESTION 36
A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN.
Which two statements are correct in this scenario? (Choose two.)
- A. The containing aggregate is thin-provisioned.
- B. The fractional reserve is set to 0%.
- C. The volume has snapshots.
- D. Deduplication is inflating the LUN when it is brought online.
Answer: A,C
NEW QUESTION 37
Click the exhibit button.
A volume move operation has been initiated to move a volume named MirrScr from one aggregate to another.
The operation failed with the error that is shown in the exhibit.
In this scenario, which statement is correct?
- A. Cancel and restart the volume move operation.
- B. There are too many snapshots on the source volume.
- C. The volume move cannot be completed at this time because of high use in this node.
- D. Manually trigger the cutover process in order to restart the job.
Answer: D
NEW QUESTION 38
Click the exhibit button.
Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf.
Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
"Both SAS connections from one controller go to the same shelf."
Referring to the exhibit, which statement is correct?
- A. You can correct this problem without downtime on the FAS system.
- B. A faulty cable is causing the problem.
- C. A faulty IOM is causing the problem.
- D. You are unable to obtain a "Cable Visualization" overview from Active IQ.
Answer: A
NEW QUESTION 39
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)
- A. There are active SIS operations running.
- B. There are active NFS connections.
- C. The HA interconnect is not operational.
- D. There are failed disks.
Answer: C,D
NEW QUESTION 40
Click the exhibit button.
A customer reports that when they are failing over Hyper-V VMs, the process fails, and the server reports an error that indicates that there is something wrong with the storage.
Referring to the exhibit, which three actions would be required in ONTAP to solve this problem? (Choose three.)
- A. Verify that the oplocks share property is configured.
- B. Verify that the continuously -available share parameter is configured.
- C. Verify that the -symlink-properties parameter is enabled on the share.
- D. Verify that -offline-files parameter is set to manual on the share.
- E. Verify that the access-based-enumeration share parameter is configured.
Answer: A,B,E
NEW QUESTION 41
Your customer states that the storage efficiency on their FAS 8200 is far below what they had expected for a VMware NFS datastore. They enabled deduplication three days ago. The job ran every night for only 10-20 minutes, and the space savings now is less than 5%.
What is causing the space savings to be so low?
- A. They have not run a baseline deduplication to scan old data.
- B. They have enabled aggregate-level inline deduplication, so the savings are at the aggregate level.
- C. They have not enabled volume-level compression.
- D. They have enabled aggregate-level inline data compaction, so the savings are at the aggregate level.
Answer: C
NEW QUESTION 42
Which statement is correct about the wafliron command?
- A. The wafliron command is used to correct WAFL i2p inconsistencies.
- B. The wafliron command is used to correct inconsistent user data blocks.
- C. The wafliron command is used to correct inconsistent WAFL metadata.
- D. The wafliron command is used to correct parity inconsistencies.
Answer: C
NEW QUESTION 43
Click the exhibit button.
A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
- B. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.
- C. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
- D. You should configure e0M so that is tagged on VLAN 40.
Answer: B,D
NEW QUESTION 44
Which two statements are true about a data volume? (Choose two.)
- A. A data volume can be moved to any aggregate with space for it in the cluster.
- B. An SVM root or root load sharing mirror volume must be present on every node.
- C. A data volume can be accessed by a LIF on any node.
- D. A data volume can be accessed by a user connected to any SVM.
Answer: A,C
NEW QUESTION 45
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)
- A. stats volume
- B. stats lun
- C. statit
- D. lun stats -vserver
Answer: C,D
NEW QUESTION 46
Click the exhibit button.
You have just cabled a new shelf to a FAS8200. Running the system node run -node * sysconfig - a command indicates that multipath HA is configured. However, after running Config Advisor, you receive an error that your cabling is incorrect.
As indicated in the exhibit, which two actions will correct the cabling? (Choose two.)
- A. Move the 0b SAS connection on the top controller to 0d on the top controller.
- B. Move the 0b SAS connection on the top controller to 0d on the bottom controller.
- C. Move the 0b SAS connection on the bottom controller to 0d on the bottom controller.
- D. Move the 0b SAS connection on the bottom controller to 0d on the top controller.
Answer: A,C
NEW QUESTION 47
You want to determine which SMB versions that a CIFS server can use when communicating with external servers.
Which two CIFS server settings should be reviewed to accomplish this task? (Choose two.)
- A. smb2-enabled-for-dc-conections
- B. smb2-enabled
- C. smb1-enabled
- D. smb1-enabled-for-dc-connections
Answer: A,C
NEW QUESTION 48
A customer has requested your assistance with replacing a DS224C disk shelf from their cluster nondisruptively.
Which two actions should be performed before physically replacing the shelf? (Choose two.)
- A. Verify that the drives in the shelves are spares and ownership is removed.
- B. Upgrade the IOMs in the shelf before starting the removal process.
- C. Verify that the system is configured as multipath high availability.
- D. Zero the disks before performing the physical shelf removal.
Answer: A,C
NEW QUESTION 49
A customer reports that a takeover has been disabled on an HA pair.
What would be a cause for this to happen?
- A. There is a disk running too hot.
- B. The cluster network is not functioning properly.
- C. The interface for the hardware assist has become unavailable.
- D. The HA interconnect is not functioning properly.
Answer: D
NEW QUESTION 50
Click the exhibit button.
Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?
- A. The InfiniBand interconnect is not used in MetroCluster.
- B. This is a 2-node MetroCluster.
- C. The InfiniBand cables should be connected in this configuration.
- D. For all MetroCluster configurations, this is expected output.
Answer: D
NEW QUESTION 51
......
Network Appliance NS0-592 Actual Questions and Braindumps: https://www.itcertmagic.com/NetworkAppliance/real-NS0-592-exam-prep-dumps.html