(2024) PASS D-PST-MN-A-24 Exam Free Practice Test with 100% Accurate Answers
D-PST-MN-A-24 dumps Free Test Engine Verified By It Certified Experts
EMC D-PST-MN-A-24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 26
When looking at the base enclosure front view, what does a solid amber drive LED indicate?
- A. Discover new drive
- B. Faulted drive
- C. Rebuild activity
- D. Normal activity
Answer: B
Explanation:
When observing the base enclosure front view of a Dell PowerStore system, a solid amber drive LED is an indication of a faulted drive. This LED status is used to alert the storage administrator that there is a fault within the drive that requires attention12.
The LED states for the Dell PowerStore base enclosure are as follows:
Blue: Power is on, and no fault has occurred.
Solid Amber: Power is on, and a fault has occurred within the enclosure.
Blue after Amber Alternating: Power is on, but the system is not initialized.
Off: Power is off.
In the event of a solid amber LED, the recommended steps are:
Identify the faulted drive: Look for the drive with the solid amber LED.
Check the PowerStore Manager: Use the PowerStore Manager to identify the specific error or fault code associated with the drive.
Follow the troubleshooting steps: Refer to the Dell PowerStore Troubleshooting Guide for detailed steps on resolving the issue with the faulted drive.
Replace the drive if necessary: If the drive is determined to be faulty and cannot be recovered, follow the Dell PowerStore Hardware Information Guide for instructions on safely replacing the drive.
For more detailed information and guidance, refer to the official Dell PowerStore documentation, such as the PowerStore Hardware Information Guide and the PowerStore Troubleshooting Guide, or contact Dell support directly
NEW QUESTION # 27
Refer to the exhibit.
What is indicated when the circled LED on the base enclosure is illuminated amber?
- A. Base enclosure power-on
- B. Base enclosure fault
- C. Cluster service mode
- D. Cluster discovery state
Answer: B
Explanation:
When the circled LED on the base enclosure of a Dell PowerStore system is illuminated amber, it typically indicates a fault within the base enclosure. This could be related to various issues such as power supply problems, cooling system malfunctions, or other operational faults that may affect the enclosure's performance.
In Dell PowerStore systems, LED indicators are used to communicate the status of the system's hardware components. An amber LED specifically suggests that there is a problem that needs to be addressed. The steps to investigate and resolve the issue usually include:
Checking the PowerStore Manager for alerts or messages that provide more details about the fault.
Inspecting the physical hardware to identify any visible signs of damage or failure.
Consulting the Dell PowerStore Hardware Guide for information on LED indicators and their meanings.
Following the recommended actions provided in the guide, which may include checking power connections, ensuring proper airflow, or other hardware checks.
If necessary, contacting Dell Support for further assistance, providing them with the details of the fault LED and any other relevant information observed.
It's important to address any faults indicated by an amber LED promptly to maintain the integrity and reliability of the storage system. The Dell PowerStore documentation provides comprehensive information on LED indicators and troubleshooting steps to help resolve such issues effectively.
NEW QUESTION # 28
What does the output of the PSTCLI command "nas_server show" display from a Dell EMC PowerStore T?
- A. SIDs of SMB NAS servers joined to the AD domain
- B. If NAS servers are present and if they are either NFS or Licensed
- C. Memory utilization and thread count for NFS NAS servers
- D. If NAS servers are present and if they are either Started or Degraded
Answer: D
Explanation:
The nas_server show command in the Dell EMC PowerStore T environment is used to display the status of NAS servers. The output of this command will indicate whether NAS servers are present and if so, their current state, which can be either 'Started' or 'Degraded'. This information is crucial for administrators to quickly assess the health and operational status of the NAS servers.
The command does not provide memory utilization, thread count, or SIDs of SMB NAS servers joined to the AD domain. Instead, it focuses on the operational status of the NAS servers, which is a critical aspect of system maintenance and troubleshooting.
For detailed information on the usage of the nas_server show command and interpreting its output, administrators should refer to the Dell PowerStore CLI User Guide1. This guide provides comprehensive instructions and examples for using the PowerStore CLI to manage and monitor the storage system effectively. It is essential to follow the official documentation to ensure accurate and reliable system management.
NEW QUESTION # 29
Which type of device is supported in expansion enclosures?
- A. SAS SSD
- B. NVMe NVRAM
- C. NVMe SCM
- D. NVMe SSD
Answer: D
Explanation:
The type of device supported in expansion enclosures for Dell PowerStore systems is NVMe SSD.
Starting with PowerStoreOS 3.0, the PowerStore models 500, 1200, 3200, 5200, and 9200 support 24-drive 2U NVMe expansion enclosures using 2.5-inch NVMe SSD drives for additional capacity1.
The NVMe expansion enclosures do not support NVMe SCM drives1.
The base enclosure can support all NVMe SSDs or a mix of NVMe SSDs and NVMe SCM drives (for the metadata tier) with an NVMe expansion enclosure attached1.
Before attaching an NVMe expansion enclosure, all drive slots 0 to 21 in the base enclosure must be populated1.
Each appliance in a PowerStore cluster supports up to three NVMe expansion enclosures1.
For more detailed information on the supported devices in expansion enclosures for Dell PowerStore systems, you can refer to the Dell PowerStore: Technical Primer1.
NEW QUESTION # 30
What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell EMC PowerStore?
- A. Static route is set
- B. Network will pass tagged traffic
- C. Network will pass untagged traffic
- D. Default route is set
Answer: C
Explanation:
Setting a VLAN ID of 0 on a network when running the Initial Configuration Wizard (ICW) for Dell EMC PowerStore indicates that the network will pass untagged traffic. In the context of VLANs, an ID of 0 is typically reserved to identify priority frames and is often used to indicate that a frame is not associated with a specific VLAN; hence, it is untagged1.
In practice, this means that when VLAN ID 0 is set during the ICW, the PowerStore system will treat the traffic as belonging to the native VLAN, which carries untagged traffic. This is important for network configurations where certain ports are expected to handle traffic that is not tagged for any specific VLAN.
For more detailed information on VLAN configurations and the implications of setting different VLAN IDs during the ICW, administrators should refer to the official Dell PowerStore Network Administration documentation. This documentation provides guidelines on network settings, including VLAN configurations, to ensure proper communication and operation within the storage network infrastructure.
NEW QUESTION # 31
Refer to the exhibit.
Which column indicates the primary appliance?
- A. IP Address
- B. Mode
- C. Service Tag
- D. Model
Answer: B
Explanation:
In the Dell EMC PowerStore system, the primary appliance is typically indicated by the 'Mode' column within the system's user interface. The 'Mode' column shows the operational mode of the appliance, which can include states such as 'Primary', 'Secondary', or 'Standby'. The primary appliance is the one that is actively servicing workloads and managing operations within the PowerStore cluster1.
The 'Service Tag' column represents the unique identifier for each physical appliance, the 'Model' column indicates the specific model of the appliance, and the 'IP Address' column shows the network address assigned to the appliance. While these columns provide important information, they do not indicate the role of the appliance within the cluster.
For more detailed information on identifying the primary appliance and understanding the role of each appliance in a PowerStore cluster, users can refer to the Dell PowerStore Clustering and High Availability documentation1. This documentation provides insights into the clustering architecture of PowerStore and how the primary appliance is determined during the initial configuration process.
NEW QUESTION # 32
Which component can be replaced while the Dell EMC PowerStore is up and running?
- A. 4-Port Mezz card
- B. LCC
- C. SFP
- D. M.2 Device
Answer: C
Explanation:
The component that can be replaced while the Dell EMC PowerStore is up and running is SFP (Small Form-factor Pluggable).
SFP modules are hot-swappable, meaning they can be replaced without powering down the system.
These modules are used for network connections and can be found in the network ports of the PowerStore appliance.
When replacing an SFP, it is important to ensure that the replacement is of the same type and speed as the one being replaced.
The process typically involves:
Removing the network cable from the SFP.
Unlocking the SFP from its socket.
Pulling the SFP out of the socket.
Inserting the new SFP into the socket until it clicks into place.
Reconnecting the network cable1.
For more detailed procedures on replacing SFP modules or other components, refer to the Dell PowerStore Installation and Service Guide or contact Dell Support for assistance.
NEW QUESTION # 33
What does the output of the command "svc_diag list -- basic" show?
- A. Failover status
- B. License status
- C. Service tag
- D. Boot mode
Answer: C
Explanation:
The output of the command "svc_diag list - basic" on a Dell PowerStore system typically shows service tag information.
The "svc_diag" command is part of the service scripts provided by Dell for diagnostic purposes on PowerStore systems.
The "list" option with the "-basic" flag is used to display a list of basic system information, which usually includes the service tag, among other details.
The service tag is a unique identifier for Dell products that is used for various purposes, including support and maintenance.
While the exact output of the command can vary based on the software version and specific system configuration, the service tag is a common piece of information displayed by such diagnostic commands1.
For the most accurate and up-to-date information about the "svc_diag list - basic" command and its output, it is recommended to consult the Dell PowerStore Service Scripts Guide or contact Dell Support directly.
NEW QUESTION # 34
When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?
- A. svc_node restart
svc_rescue_state start - B. svc_node shutdown
svc_rescue_state clear - C. svc_rescue_state normal
svc_node start - D. svc_rescue_state clear
svc_node reboot
Answer: D
Explanation:
When a Dell EMC PowerStore node powers up in service mode, the commands and sequence used from the appliance SSH client to restore the node back to normal are as follows:
Run the svc_rescue_state clear command to clear the boot mode and take the node out of service mode1.
Then, run the svc_node reboot command to reboot the node and return it to normal operational mode1.
It is important to follow this sequence to ensure that the node exits service mode correctly and reboots into normal mode without any issues. For more detailed instructions or if you encounter any problems during this process, refer to the Dell EMC PowerStore Service Scripts Guide or contact Dell EMC Support for assistance1.
NEW QUESTION # 35
How many fan module failures can a node tolerate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
A Dell EMC PowerStore node can tolerate one fan module failure. The system is designed with redundancy to ensure that if a single fan module fails, the remaining fan modules can compensate for the loss and maintain proper cooling to prevent overheating1. The system will increase the speed of the remaining fans to ensure continued cooling.
When a fan module failure occurs, the system will generate an alert to notify the administrator of the fault. The administrator should then take the following steps:
Acknowledge the alert in the PowerStore Manager.
Plan for the replacement of the faulted fan module as soon as possible to restore full redundancy.
Follow the replacement procedures as outlined in the Dell PowerStore Installation and Service Guide1.
It is important to address fan module failures promptly to ensure the long-term health and performance of the PowerStore system. The increased fan speed is a temporary measure to maintain operations until the faulted fan module can be replaced.
NEW QUESTION # 36
While on-site troubleshooting a Dell EMC PowerStore system, the node B embedded module fault LED is blinking blue and amber alternating at one second intervals. What does this indicate?
- A. Node is in service mode
- B. Node is booting
- C. Node is in degraded mode
- D. System is not initialized
Answer: A
Explanation:
When the node B embedded module fault LED on a Dell EMC PowerStore system is blinking blue and amber alternating at one-second intervals, it indicates that the node is in service mode1. Service mode is a state where the node is not in normal operation and may be undergoing maintenance or diagnostics.
In service mode, the node is typically isolated from normal storage operations to allow for troubleshooting, hardware replacement, or software updates without affecting the rest of the system. The alternating blue and amber LED is a visual indicator used by technicians to identify the current state of the node.
To return the node to normal operation, the service task must be completed, and the node must be taken out of service mode using the appropriate commands through the system's management interface. For detailed procedures on managing nodes in service mode, refer to the Dell EMC PowerStore Service Manual or contact Dell EMC Support for guidance2.
NEW QUESTION # 37
When planning for a Dell EMC PowerStore X implementation, how many IP addresses are required for the storage network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
For a Dell EMC PowerStore X implementation, a minimum of six IP addresses are required for the storage network. This is to accommodate the various components that need network connectivity within the PowerStore infrastructure1.
The allocation of these IP addresses typically includes:
* Two IP addresses for the storage processors or nodes within the PowerStore appliance.
* Two IP addresses for the management interfaces.
* Two additional IP addresses for redundancy or other network services.
It's important to plan the network configuration carefully to ensure that there are enough IP addresses available for all required services and for future expansion. For optimization and best practices in IP address allocation, administrators should refer to the Dell EMC PowerStore Networking Guide for Storage Services2. This guide provides detailed information on network requirements, including IP address allocation and network design considerations for PowerStore systems.
NEW QUESTION # 38
From where can a data collection be initialized within Dell EMC PowerStore Manager?
- A. Node, storage resource, and alerts
- B. Cluster, appliance, and event log
- C. Appliance, node, and storage resource
- D. Cluster, appliance, and alerts
Answer: D
Explanation:
A data collection in Dell EMC PowerStore Manager can be initiated from the cluster, appliance, and alerts sections within the PowerStore Manager user interface. This process is essential for gathering system logs and other information that can be used for troubleshooting or analysis.
To initiate a data collection, follow these steps:
Log into the PowerStore Manager user interface.
Navigate to the 'Settings' menu.
Go to the 'Support' section.
Select 'Gather Support Materials'.
Choose the scope of the data collection, which can be at the cluster level, for a specific appliance, or related to certain alerts.
Click the 'Gather Support Materials' button to start the collection process.
Monitor the progress in the 'Jobs' section of PowerStore Manager or within the 'Support Materials' section1.
It is important to note that the data collection process may take some time to complete, depending on the amount of data and the system's performance. Once the data collection is finished, the gathered materials can be used by Dell EMC support for further analysis or can be reviewed by the storage administrator to address any issues1. For more detailed instructions on data collection, refer to the Dell EMC PowerStore documentation or the support knowledge base articles provided by Dell23. Following these guidelines ensures that the data is collected correctly and efficiently.
NEW QUESTION # 39
Which component is only replaceable by qualified personnel?
- A. Base enclosure
- B. Power supply
- C. Memory module
- D. Embedded I/O module
Answer: A
Explanation:
The base enclosure is a component that is typically only replaceable by qualified personnel. This is because the base enclosure of a Dell PowerStore system contains critical components and connections that require specialized knowledge and tools to handle properly. Replacing a base enclosure involves understanding the system's architecture, safely disconnecting and reconnecting various components, and ensuring that the system is not compromised during the process.
The memory module, embedded I/O module, and power supply are designed to be more accessible for replacement and may fall under the category of customer-replaceable units (CRUs) or field-replaceable units (FRUs), depending on the specific model and configuration of the PowerStore system1.
For detailed procedures on replacing the base enclosure or any other components, it is recommended to refer to the official Dell PowerStore Installation and Service Guide. This guide provides step-by-step instructions and safety precautions for qualified personnel to follow when performing hardware replacements1. It is crucial to adhere to these guidelines to maintain system integrity and ensure that the storage system continues to operate effectively after the replacement.
NEW QUESTION # 40
Correctly order the steps of the embedded module replacement procedure.
Answer:
Explanation:
1 - Power down the node
2 - Push the orange tab to release the lever of the embedded module
3 - Label and disconnect all cables attached to the embedded module
4 - Remove the 4-port card from the old embedded module and install it into the new embedded module
5 - Align the embedded module with the empty slot and carefully push it into the slot
NEW QUESTION # 41
How is a service laptop IP configured to connect to the Service LAN port of a Dell EMC PowerStore node?
- A. Obtain IP address from DHCP on PowerStore
- B. Static IP: 128.221.1.249 and netmask: 255.255.255.0
- C. Static IP: 169.254.1.249 and netmask: 255.0.0.0
- D. Leave IP address and netmask unconfigured
Answer: B
Explanation:
To connect a service laptop to the Service LAN port of a Dell EMC PowerStore node, the laptop's Ethernet interface should be configured with a static IP address and netmask. The correct configuration is:
IP: 128.221.1.249
Netmask: 255.255.255.0
Gateway: None1
This configuration allows the service laptop to communicate with the PowerStore nodes for SSH and PowerStore Manager (UI) access. It's important to note that the laptop can be physically connected to one of the PowerStore nodes at a time, or to both nodes' Service LAN ports using a small switch or hub. However, multiple appliances should never be connected to the same hub or switch as the nodes use the same internal IPs1.
Once the IP is configured as shown above and the physical connection is established, you can ping the relevant IPs:
Node A: 128.221.1.250
Node B: 128.221.1.251
You should only be able to ping the IPs where you are physically connected to. If you can ping, you can proceed to use SSH to connect to the IPs over port 22 using your preferred SSH client. For file transfers, SCP protocol must be used1.
For more detailed instructions on how to connect to the system over the Service LAN Ports for SSH and PowerStore Manager access, refer to the Dell Support Knowledge Base Article1.
NEW QUESTION # 42
What does the command "svc_journalctl -f -g "st_io_monitor""do?
- A. Ignores log messages from the specified error and re-occurring errors
- B. Rotates the log based on the specified error
- C. Retrieves log messages from the specified error and watches for re-occurrence
- D. Deletes all logs before the specified error
Answer: C
Explanation:
The command svc_journalctl -f -g "st_io_monitor" is used within the Dell PowerStore environment to retrieve log messages that are associated with the specified error, in this case, "st_io_monitor", and to monitor for their re-occurrence. The -f flag is typically used to follow the log, meaning it will continue to output new log messages as they are appended to the journal. The -g flag is used to filter the log output based on a specific pattern1.
This command is part of the suite of service scripts provided by Dell for system maintenance and troubleshooting. It enables service technicians and system administrators to view log messages from the system journal in a consistent and easy-to-read format, which is crucial for diagnosing and resolving issues1.
For more detailed information on using this command and understanding the system journal logs, users should refer to the Dell PowerStore Service Scripts Guide or contact Dell Support for technical assistance1. It's important to use these commands as per the guidelines provided in the official documentation to ensure proper system maintenance and to avoid any unintended consequences.
NEW QUESTION # 43
A Storage Administrator notices a Critical alert present in Dell EMC PowerStore Manager relating to data integrity. What action within the alert details slide-out panel is helpful in troubleshooting the problem?
- A. Access the Repair Flow link to schedule a support engagement
- B. Re-engage support through previous listed Related Events
- C. Select the Gather Support Materials from Service and Support
- D. Examine Notifications to obtain a list of corrective actions
Answer: C
Explanation:
When a critical alert related to data integrity is present in Dell EMC PowerStore Manager, the most helpful action for troubleshooting the problem is to select the "Gather Support Materials" option from the Service and Support section. This action facilitates the collection of logs, system information, and other relevant data that can be used by Dell EMC support to diagnose and resolve the issue1.
The process typically involves:
Accessing the alert details slide-out panel within the PowerStore Manager.
Reviewing the critical alert to understand the nature of the data integrity issue.
Selecting the "Gather Support Materials" option, which may include system logs, configuration files, and other diagnostic information.
Following the prompts to collect and package the support materials.
Sending the gathered materials to Dell EMC support for further analysis and assistance.
This proactive step is crucial in expediting the support process and ensuring that the Dell EMC support team has all the necessary information to address the data integrity alert effectively. It is recommended to perform this action as soon as the critical alert is noticed to prevent any potential data loss or system downtime2.
For more detailed instructions on how to gather support materials and manage alerts, administrators should refer to the Dell PowerStore Manager Overview documentation and the PowerStore Alerts knowledge base articles provided by Dell12. These resources offer comprehensive guidance on maintaining and troubleshooting the PowerStore system.
NEW QUESTION # 44
What is the reason for the best practice of leaving 2 Us of space at the bottom of the rack when racking Dell EMC PowerStore systems?
- A. Provide cooling air intake
- B. Leave clearance for wheel roll
- C. Leave room for serviceability
- D. Provide better rack stability
Answer: C
Explanation:
The reason for the best practice of leaving 2 Us of space at the bottom of the rack when racking Dell EMC PowerStore systems is to leave room for serviceability.
When installing a Dell EMC PowerStore system, it is recommended to leave 2 Us of space at the bottom of the rack.
This space is not for cooling, wheel clearance, or stability, but rather to ensure that there is enough room for service activities1.
Serviceability involves the ability to access and maintain hardware components easily. The additional space allows for better maneuverability and access to the system for maintenance and repairs.
Following this best practice helps in preventing potential issues that might arise from cramped spaces, which can make it difficult to perform necessary service tasks1.
For more detailed information on installation best practices, refer to the Dell EMC PowerStore Quick Start Guide or the Best Practices Guide21.
NEW QUESTION # 45
When planning for a Dell EMC PowerStore T implementation, what is the minimum number of IP addresses required for the storage network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
When planning for a Dell EMC PowerStore T implementation, the minimum number of IP addresses required for the storage network is two. This is because each PowerStore T appliance requires a minimum of one IP address per node for the storage network. Since the PowerStore T model typically comes with two nodes (Node A and Node B), you will need at least two IP addresses-one for each node1.
It's important to note that while two IP addresses are the minimum requirement, having additional IP addresses can be beneficial for optimization purposes. For example, the PowerStore 3000X, 5000X, 7000X, and 9000X models recommend having six IP addresses minimum per appliance for the storage network, with eight being recommended for optimization2.
In summary, for a basic PowerStore T setup, two IP addresses are required for the storage network to accommodate each node within the appliance. However, depending on the specific model and the scale of your implementation, more IP addresses may be recommended to ensure optimal performance and management of the storage network.
NEW QUESTION # 46
Which number in the code-naming schema represents a beta distribution?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
In the Dell PowerStore code-naming schema, the number that represents a beta distribution is 4. This is based on the PowerStoreOS release matrix, where the versioning and distribution types are indicated by specific digits in the version number. The third digit in the version number typically represents the target code, which is a highly trusted and recommended release1.
For beta distributions, which are pre-release versions provided for testing purposes, Dell uses specific numbering conventions to distinguish them from general availability releases. These beta versions are important for testing new features and fixes in a controlled environment before they are released to all customers.
For detailed information on the code-naming schema and understanding the different types of software distributions for Dell PowerStore, including beta distributions, administrators should refer to the official Dell PowerStoreOS Matrix documentation. This document provides a comprehensive overview of the versioning system and the criteria used to determine the target code and other distribution types1.
NEW QUESTION # 47
How many nodes are in the base enclosure?
- A. 1 node with duel connectivity
- B. 2 nodes configured as Active-Active
- C. 1 node with high availability enabled
- D. 2 nodes configured as Active-Standby
Answer: D
Explanation:
The Dell EMC PowerStore base enclosure contains two nodes. These nodes are configured in an Active-Standby mode to ensure high availability and load balancing1. Each node is 1U in size and stacks vertically within the base enclosure, with the top node inverted to fit within the compact design. This configuration allows for one node to be actively handling workloads while the other stands by ready to take over in case of a failure or maintenance event, ensuring continuous operation and data accessibility1.
For more detailed information on the node configuration within the PowerStore base enclosure, administrators can refer to the Dell PowerStore Introduction to the Platform documentation, which provides insights into the system's architecture and design considerations1. It is important to understand the node roles and configurations to effectively manage and maintain the PowerStore system.
NEW QUESTION # 48
What is an alternative way to collect logs instead of using the Dell EMC PowerStore manager GUI?
- A. Discovery Utility
- B. USB stick inserted into the system
- C. Data Collect using vCenter
- D. Data Collect using Service Container
Answer: D
Explanation:
An alternative way to collect logs instead of using the Dell EMC PowerStore manager GUI is Data Collect using Service Container.
The Dell EMC PowerStore provides multiple methods for collecting logs for troubleshooting and analysis.
While the PowerStore Manager GUI is a common method, using the Service Container via SSH/CLI is an alternative way to gather logs1.
This method involves connecting to the PowerStore system's Service Container through SSH and running specific service commands to collect the required logs.
The commands svc_dc download -h or svc_dc upload -h can be used to download or upload logs directly from and to the system1.
This process is particularly useful when the GUI is not accessible or when directed by Dell Support to collect more detailed logs for complex issues.
For detailed instructions on log collection using the Service Container, refer to the Dell PowerStore Service Scripts Guide or contact Dell Support for assistance.
NEW QUESTION # 49
......
Latest EMC D-PST-MN-A-24 Practice Test Questions: https://www.itcertmagic.com/EMC/real-D-PST-MN-A-24-exam-prep-dumps.html
Realistic D-PST-MN-A-24 Accurate & Verified Answers As Experienced in the Actual Test!: https://drive.google.com/open?id=187w4n0gfh8Wac9JFVtsReR6O-7HtkZ_4