[2023] Pass Key features of NACE-CIP2-001 Course with Updated 100 Questions
NACE-CIP2-001 Sample Practice Exam Questions 2023 Updated Verified
NEW QUESTION # 48
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. Increase the standoff distance
- B. a), b) and c)
- C. Lower the blast pressure
- D. Move the nozzle quicker
Answer: B
NEW QUESTION # 49
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Non-Conductive coatings applied to a conductive metallic substrate
- B. Conductive coatings applied to a cementitious substrate
- C. Magnetic coatings applied to a magnetic metallic substrate
- D. Conductive coatings applied to a magnetic metallic substrate
Answer: A
NEW QUESTION # 50
NACE International Standards are developed by:
- A. International mandates
- B. Regional mandates
- C. Government mandates
- D. Standard committees
Answer: D
NEW QUESTION # 51
When NACE/SSPC WJ 1 is referenced; what type of equipment would the Inspector expect to see on the job:
- A. Power Tools
- B. Abrasive Blasting Equipment
- C. Water Jetting Equipment
- D. Scarifiers
Answer: C
NEW QUESTION # 52
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings protect the contents and the container.
- B. linings are more durable than coatings.
- C. coatings are more durable than linings.
- D. coatings are expected to degrade over time.
Answer: A
NEW QUESTION # 53
Non-Conformance Reports are designed to:
- A. Punish the Contractor for substandard work
- B. Assist the Owner in negotiating credits from the Contractor
- C. Elevate the status of the Inspector
- D. To identify items that do not meet the specification requirements
Answer: D
NEW QUESTION # 54
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Gathering
- B. Midstream
- C. Transmission
- D. Distribution
Answer: D
NEW QUESTION # 55
The primary purpose of Fireproofing coatings are to provide:
- A. fire extinguishing characteristics
- B. Explosion resistance
- C. Temporary protection for the structure
- D. Preferential fuel for the fire
Answer: C
NEW QUESTION # 56
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Defend the previous inspector
- B. Suggest to the Owner that the supervisor should be removed from site
- C. Express a willingness to work with the site team and follow the specification
- D. Challenge the supervisor's authority
Answer: C
NEW QUESTION # 57
When observing fabrication defects the NACE Inspector should:
- A. Stop the job immediately
- B. Consult the specification to determine how they should be treated
- C. Write an NCR and call the fabricator
- D. Require they be corrected prior to coating
Answer: B
NEW QUESTION # 58
Coating application to concrete substrates is:
- A. The same as coating steel
- B. More challenging than coating steel
- C. Less challenging, than coating steel
- D. Not required as Concrete is inorganic
Answer: B
NEW QUESTION # 59
A reinforced coating is
- A. equally resistant to abrasion and impact as a non-reinforced coating.
- B. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. equally resistant to movement and impact as a non-reinforced coating.
- D. less resistant to movement, abrasion, and impact than a non-reinforced coating.
Answer: B
NEW QUESTION # 60
Inspection and Test Plans are provided to:
- A. So the Inspector doesn't have to read the entire specification
- B. To supersede the requirements of the product data sheets
- C. So the contractor has a single document to reference
- D. Outline the inspection steps, sequencing and pass/fail criteria
Answer: D
NEW QUESTION # 61
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. Sacking
- C. Stoning
- D. High-pressure water washing
Answer: B
NEW QUESTION # 62
A failure caused by applying a coating too thinly is known as
- A. failure to cure.
- B. pinholes.
- C. cracking.
- D. chalking.
Answer: B
NEW QUESTION # 63
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Cost
- B. Iron content
- C. Safety
- D. Appearance
Answer: B
NEW QUESTION # 64
......
NACE-CIP2-001 exam is an internationally recognized certification for coating inspectors who have a good understanding of coating materials, surface preparation, and application techniques. Coating Inspector Level 2 certification is designed to ensure that coating inspectors have the knowledge and skills needed to perform their job effectively. Coating Inspector Level 2 certification is recognized in the industry as a standard for coating inspectors, and it is highly sought after by companies that require coatings inspections. If you are a coating inspector looking to advance your career, then the NACE-CIP2-001 certification is definitely worth considering.
The New NACE-CIP2-001 2023 Updated Verified Study Guides & Best Courses: https://www.itcertmagic.com/NACE/real-NACE-CIP2-001-exam-prep-dumps.html
Exam Study Guide Free Practice Test LAST UPDATED : https://drive.google.com/open?id=1Xr5qLsiGkWkBe5Ot-PCTeFsdO2jKHXj0