2021 Updated Network Appliance NS0-302 Dumps PDF - Want To Pass NS0-302 Fast
NS0-302 Practice Exam Dumps - 99% Marks In Network Appliance Exam
How to Study the Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator Exam
We propose that NetApp Qualified Deployment EngineerâÂÂSAN, ONTAP applicants have six to 12 months of experience in preparing, deploying, and validating end-to-end SAN solutions for customers in FC and iSCSI environments. It is strongly advisable to study the NS0-302 exam dumps and take the NS0-302 practice tests. Also, experience SAN deployment in virtualized systems and distributed environments. NCIE-SAN Expert, ONTAP applicants must first obtain the NetApp Certified Data Administrator (NCDA) certification.
Recommended Training and Resources:
- View Exam Topics
- Cloud Implementation â Switch Configuration (WBT)
- Cloud Administration
- Cloud Implementation (ILT)
- To enroll in NetApp University training courses, you will need a NetApp Support Site account.
- Register for NS0-302
- Reference document (PDF)
- ONTAP SAN Fundamentals (WBT)
- Practice Test for NS0-302
For more info read reference:
Network Appliance NS0-302 Certification leaning site Network Appliance NS0-302 Certification resources
Introduction to Network Appliance NS0-302: NetApp Certified Hybrid Cloud Administrator Exam
ONTAP SAN, Swapped FC fabrics, Ethernet iSCSI/FCoE implementations, various organizational systems (Windows, LINUX, ESX, UNIX) and software have proved your ability in planning, executing, integrating, and troubleshooting.
NCIE â ONTAP logos and credentials, SAN Expert, and NetApp Certified Deployment Engineer-San NS0-302 credential will be awarded to persons who have successfully earned NetApp Certified Data Administrator, ONTAP certification (NCDA ONTAP).
NCIE-SAN Specialist, E-Series logos, and certificates will be granted to those individuals who successfully pass the NetApp Certified NS0-302 exam. Candidates for NS0-302 dumps are seeking to understand fundamental concepts of cloud administration.
NEW QUESTION 45
You have a single node Cloud Volumes ONTAP instance in AWS. You are required to have high availability for the data with no data loss across availability zones.
In this scenario, which two actions are required to accomplish this task? (Choose two.)
- A. Mirror the data.
- B. Create a new HA pair.
- C. Add a second node to the cluster.
- D. Tier the data to S3.
Answer: A,B
NEW QUESTION 46
Your company has evaluated NetApp SaaS Backup for Microsoft Office 365 with a trial account. In the evaluation period, you used Amazon S3 that was provided by SaaS Backup as the destination for your backup. After evaluation, your company decided to use Bring Your Own Storage (BYOS) as a backup destination. You determine that none of your previous data is showing up.
What caused this problem?
- A. Upgrading from evaluation to licensed reset your SaaS Backup account.
- B. When upgrading from trial to licensed, data was not preserved.
- C. Changing the destination to BYOS did not migrate the data.
- D. During the change from evaluation to licensed, the access token expired.
Answer: B
NEW QUESTION 47
You want to use FabricPool on your AFF A300.
In this scenario, which three tiering policies show inactive data on your volumes? (Choose three.)
- A. none
- B. mirror
- C. auto
- D. snapshot-only
- E. backup
Answer: B,D,E
NEW QUESTION 48
You are using a NetApp HCI and are asked to perform offsite backups of all dat A.
Which three targets satisfy this requirement? (Choose three.)
- A. Azure Blob
- B. ONTAP9.5
- C. Amazon Redshift
- D. Amazon S3
- E. Element software
Answer: A,B,D
NEW QUESTION 49
As a Cloud Volumes ONTAP administrator on AWS, you want to secure your Cloud Volumes ONTAP nodes so that you can access them from only your 10.50.0.0/16 network.
In this scenario, what would you modify to secure the nodes?
- A. Change the Cloud Manager Security Group from 0.0.0.0/0 to 10.0.0.0/8.
- B. Change the Cloud Volumes ONTAP Security Group from 0.0.0.0/0 to 10.0.0.0/8.
- C. Change the Cloud Manager Security Group from 0.0.0.0/0 to 10.50.0.0/16.
- D. Change the Cloud Volumes ONTAP Security Group from 0.0.0.0/0 to 10.50.0.0/16.
Answer: D
NEW QUESTION 50
You are modifying the service level from standard to premium.
In this situation, which two Cloud Volumes Service parameters are modified? (Choose two.)
- A. disk type
- B. capacity per volume
- C. megabytes per second
- D. IOPs per second
Answer: C
NEW QUESTION 51
You are setting up a Cloud Volumes ONTAP HA on AWS.
In this scenario, which high availability method is used for the data?
- A. Both nodes connect to a shared pool of mirrored EBS disks.
- B. Volume Snapshot copies are replicated between both nodes.
- C. Data is synchronously mirrored between both nodes.
- D. Both nodes connect to a shared pool of S3 storage.
Answer: C
NEW QUESTION 52
What is the difference between a mirror and a backup replication policy?
- A. Backup replication policies can retain more Snapshot copies at the destination than at the source.
- B. Mirror replication policies are faster than backup replication policies.
- C. Backup replication policies are faster than mirror replication policies.
- D. Mirror replication policies can retain more Snapshot copies at the destination than at the source.
Answer: D
NEW QUESTION 53
You created a volume with Cloud Volumes Service for AWS for an analytics application. The application using the volume requires maximum performance. You have set the service level to "extreme". All the analysis takes place between 9:00 A.m. and 5:00 p.m.
In this scenario, how would you optimize storage cost?
- A. Use the API to lower the service level of the volume during off-peak hours.
- B. Reduce the capacity of the volume.
- C. Use the built-in sync service to move the volume to another region with lower cost storage.
- D. Create a new volume with a lower service level.
Answer: B
NEW QUESTION 54
You want to remove deduplication from a volume on Cloud Volumes ONTAP by using the volume efficiency off command.
In this situation, which three statements are true? (Choose three.)
- A. You can remove only the deduplication savings and not the compression savings.
- B. When removing deduplication, the duplicate blocks in the volume are automatically deleted.
- C. Deduplication cannot be restarted on that volume within 24 hours to allow all background scanners to complete.
- D. You cannot stop post process deduplication and continue using post process compression.
- E. By turning off deduplication, you also turn off both inline and post process compression.
Answer: B,C,D
NEW QUESTION 55
Click the Exhibit button.
You have implemented NetApp Data Availability Services (NDAS) as shown In the exhibit. In this scenario, which two actions occur with the data copies? (Choose two.)
- A. Data is copied to the cloud using Intercluster LIFs.
- B. Data Is rehydrated when copying to S3.
- C. Storage efficiency is maintained for all replication.
- D. A Linux proxy copies data from ONTAP to AWS.
Answer: A,D
NEW QUESTION 56
Click the Exhibit button.
Your customer has chosen Premium Performance Tier on AWS Cloud Volume Services for a database requiring 15,000 IOPS. However, users are reporting that the database performance is very low.
Referring to the exhibit, what should you recommend?
- A. Disable Data at Rest Encryption.
- B. Create a second Premium instance.
- C. Change the maximum bandwidth in the Premium Tier.
- D. Upgrade to the Extreme Performance Tier.
Answer: D
NEW QUESTION 57
Click the Exhibit button.
You are provisioning Cloud Volumes ONTAP In AWS with OnCommand Cloud Manager. Referring to the exhibit, which technology Is encrypting the data at rest?
- A. KMS
- B. AES-NI
- C. NVE
- D. NSE
Answer: A
NEW QUESTION 58
Your environment that is monitored by Cloud Insights is growing rapidly and requires the deployment of additional Data Collectors. You want to deploy preconfigured collectors.
In this scenario, what allows you to accomplish this task?
D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Data Collector cloning
- B. Data Collector bulk import
- C. Data Collector Federation
- D. Data Collector PowerShell script
Answer: B
Explanation:
Reference:
task_view_configured_data_collectors.html#controlling-data-collector-polling
NEW QUESTION 59
You are deploying a Cloud Volumes ONTAP HA system that uses multiple Availability Zones In AWS. You want to make sure that you can access the floating IP addresses in your Virtual Private Cloud (VPC. from your other VPCs in the same AWS region in which you have deployed your Cloud Volumes ONTAP HA system.
How do you accomplish this task?
- A. Use OnCommand Systems Manager to make floating IP addresses accessible between your VPCs.
- B. Use the AWS Transit Gateway service to create a route to your floating IP addresses.
- C. Create peering between your VPCs using the AWS console.
- D. Use OnCommand Cloud Manager to make floating IP addresses accessible between your VPCs.
Answer: D
NEW QUESTION 60
You are the administrator for your company's Cloud Volumes ONTAP instances in AWS. You are experiencing problems with OnCommand Cloud Manager. NetApp support asks you to provide log files.
In this situation, which two methods would accomplish this task? (Choose two.)
- A. Go to the Support Dashboard in the Cloud Manager UI and click the Send Now button.
- B. Use SSH to log in to the Cloud Manager instance and collect the logs from the "/opt/application/netapp/cloudmanager/log" directory.
- C. Set up a remote session with amazon Web Services (AWS) support to demonstrate the problem.
- D. Go to the AWS Management Console and collect the logs from AWS CloudWatch.
Answer: B,D
NEW QUESTION 61
Click the Exhibit button.
You are the administrator of Azure NetApp Files. You want to secure the NFS mount for your volume so that only the database server 10.10.8.14 can mount the volume.
Referring to the exhibit, to secure the volume, which two steps must you perform in the export policy? (Choose two.)
- A. Modify Index 1 from Read & Write to No Access.
- B. Delete index 1.
- C. Add a new Index for 10.10.8.14/32 Read & Write.
- D. Add a new index for 0.0.0.0/0 Read Only.
Answer: B,D
NEW QUESTION 62
You are building a Cloud Volumes ONTAP HA for AWS system to support a high performance OLTP database.
In this scenario, which two AWS disk types would you use? (Choose two.)
- A. Throughput Optimized HDD (st1)
- B. Provisioned IOPS SSD (io1)
- C. Cold HDD (sc1)
- D. General Purpose SSD (gp2)
Answer: B,D
NEW QUESTION 63
After deploying Cloud Volumes ONTAP in AWS, you notice a high CPU warning that is reported by Amazon CloudWatch.
In this scenario, what should you do?
- A. Upgrade Cloud Volumes ONTAP to the latest version.
- B. Ignore this warning, the alarm Is not relevant.
- C. Change Amazon Elastic Block Storage (Amazon EBS) disks.
- D. Change the instance size to avoid this warning.
Answer: A
NEW QUESTION 64
......
Updated Verified NS0-302 Q&As - Pass Guarantee: https://www.itcertmagic.com/NetworkAppliance/real-NS0-302-exam-prep-dumps.html