100% Real & Accurate C1000-058 Questions and Answers with Free and Fast Updates
Get Unlimited Access to C1000-058 Certification Exam Cert Guide
NEW QUESTION # 18
Which statement is true regarding the use of CHLAUTH rules?
Response:
- A. They can be used to auto-define cluster sender channels for inbound channels to the full repository
- B. They can be used to set an MCAUSER value for any channel asserting a specific user ID
- C. They can be used to set an MQ service that overrides firewall policy on inbound channels
- D. They can be used to configure the TLS distinguished name within the queue manager personal certificate.
Answer: B
NEW QUESTION # 19
What does a Trigger Monitor do in IBM MQ?
- A. Monitors queue depths and initiates actions
- B. Processes triggered messages
- C. Initiates triggers based on message content
- D. Manages the execution of trigger scripts
Answer: A
NEW QUESTION # 20
Which FFST Report field can be used to trigger tracing to start?
Response:
- A. Probe ID
- B. FDC ID
- C. FFST ID
- D. Error ID
Answer: A
NEW QUESTION # 21
An existing queue manager has a number of users and applications already provisioned for basic MQ access. The MQ Administrator must enable Advanced Message Security for the first time on this queue manager.
Which change must be made to the queue manager's configuration to accomplish this goal?
- A. Issue the SET AUTHREC command
- B. Issue the REFRESH QMGR TYPE(CONFIGEV) command
- C. Issue the SET POLICY command
- D. Issue the REFRESH SECURITY TYPE(SSL) command
Answer: D
NEW QUESTION # 22
The following commands are issued on QMGA:
DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(BALL) DEFINE QLOCAL(QMGB)
USAGE(XMITQ)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGB)
The following commands are issued on QMGB:
DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(TENNIS) DEFINE QLOCAL(QMGC)
USAGE(XMITQ) DEFINE QLOCAL(TENNIS)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGC)
The following commands are issued on QMGC:
DEFINE QREMOTE(BALLS) RNAME(BALLS) RQMNAME(QMGB) DEFINE
QLOCAL(QMGB) USAGE(XMITQ)
DEFINE QALIAS(BALL) TARGET(RUGBY) DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
Where does the message go when it is put to BALLS on QMGC?
- A. TENNIS on QMGA
- B. TENNIS on QMGC
- C. TENNIS on QMGC
- D. TENNIS on QMGB
Answer: D
NEW QUESTION # 23
Which authentication mechanism is commonly used in IBM MQ for validating the identity of connecting applications?
- A. SSL/TLS Certificates
- B. LDAP Authentication
- C. Kerberos Authentication
- D. HMAC Authentication
Answer: A
NEW QUESTION # 24
Which statement is true regarding the use of CHLAUTH rules?
- A. They can be used to auto-define cluster sender channels for inbound channels to the full repository
- B. They can be used to set an MCAUSER value for any channel asserting a specific user ID
- C. They can be used to set an MQ service that overrides firewall policy on inbound channels
- D. They can be used to configure the TLS distinguished name within the queue manager personal certificate.
Answer: B
NEW QUESTION # 25
Statistics must be gathered for a channel on a distributed platform queue manager which connects to a z/OS queue manager. The channel will be processing a very high message volume and the processing impact to the distributed queue manager must be minimized.
What is the appropriate setting for the STATCHL property of the channel definition?
Response:
- A. Medium
- B. High
- C. Low with the QMGR STATCHL property set to NONE
- D. Low
Answer: D
NEW QUESTION # 26
In application triggering what is the role of trigger monitor process?
Response:
- A. It monitors the initiation queue and based on trigger message issues a command to start an application.
- B. It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.
- C. It monitors the transmission queue and based on trigger message issues a command to start an application.
- D. It monitors the application queue and when the trigger conditions are met and issues a command to start an application.
Answer: A
NEW QUESTION # 27
Which MQ object is responsible for connecting applications to a queue manager?
- A. Process
- B. Queue
- C. Channel
- D. Listener
Answer: C
NEW QUESTION # 28
What is the default port number for client connections to a queue manager using TCP/IP in IBM MQ?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 29
An administrator executes the following control command: crtmqm -q -d Q2 QM1 What is the effect of the above command?
Response:
- A. The command creates queue manager QM1, queue Q2, and specifies Q2 as its default transmission queue.
- B. The command creates queue manager QM1, queue Q2, and specifies Q2 as its dead letter queue.
- C. The command creates default queue manager QM1 and specifies Q2 as its default transmission queue.
- D. The command creates default queue manager QM1 and specifies Q2 as its dead letter queue.
Answer: B
NEW QUESTION # 30
Which MQSC command is used to create a local queue in IBM MQ?
- A. SETUP QUEUE
- B. DEFINE QUEUE
- C. MAKE QUEUE
- D. CREATE QUEUE
Answer: B
NEW QUESTION # 31
What is the purpose of the AMQERR01.LOG file in IBM MQ?
- A. Archives completed message transactions
- B. Records incoming message acknowledgments
- C. Manages queue depth information
- D. Stores error and problem records
Answer: D
NEW QUESTION # 32
Which IBM MQ component ensures that messages are delivered once and only once, even in the event of failures?
- A. Persistent Messages
- B. Message Persistence
- C. Message Acknowledgment
- D. Duplex Queues
Answer: B
NEW QUESTION # 33
What is the extension is used for IBM MQ FFST reports?
Response:
- A. ffst
- B. fdc
- C. fst
- D. dmp
Answer: B
NEW QUESTION # 34
If the channel attribute for USEDLQ is set to NO, what behavior would occur for messages?
Response:
- A. If the queue manager DEADQ attribute provides the name of a dead-letter queue, then it is used.
- B. Messages that cannot be delivered by a channel are treated as a failure.
- C. The channel will not support XA transactions.
- D. The channel will store all failed messages.
Answer: B
NEW QUESTION # 35
For MQ Advanced for distributed platforms, which two components are included? (Select two.)
- A. MessageSight
- B. Managed File Transfer
- C. IBM MQ Internet Pass-Thru
- D. MQ Appliance
- E. Advanced Message Security
Answer: B,E
NEW QUESTION # 36
What does "Caching" involve in performance tuning?
- A. Storing frequently accessed data for faster retrieval
- B. Prioritizing CPU tasks
- C. Reducing system memory allocation
- D. Slowing down data transfer rates
Answer: A
NEW QUESTION # 37
What is one of the prerequisites to migrate a single instance queue manager to a multi-instance one?
- A. Define CLUSRCVR and CLUSSDR channels
- B. Backup the single instance queue manager, shut it down, then create a new shared queue manager and restore backed up configuration
- C. Move the queue manager data to a shared directory and reconfigure it to use that shared directory
- D. Enable queue manager trace
Answer: C
NEW QUESTION # 38
An administrator has a new application that sends 2MB messages to a remote queue manager, which is significantly larger than current messages which are 50KB. How can an administrator ensure minimal impact on the existing environment?
Response:
- A. Use separate channels and transmit queues for the new messages.
- B. Set MSGGROUP to TRUE and MSGSIZE to a value of 2MB.
- C. Require the queue manager to use message chunking.
- D. Set the workload balancing option to MIXEDSIZE.
Answer: A
NEW QUESTION # 39
An administrator is connecting to e remote queue manager to perform remote administration tasks using MQ Explorer.
Which two permissions should the administrator set on the target queue manager object for the user running MQ Explorer in addition to DISPLAY? (Select two.)
- A. GET
- B. CONNECT
- C. INQUIRE
- D. PUT
- E. BROWSE
Answer: A,C
NEW QUESTION # 40
When using the rcrmqobj command to re-create an object from its image in the log, which condition must be satisfied?
- A. Circular logging is used
- B. The queue manager is stopped
- C. Linear logging is used
- D. The object is marked as damaged
Answer: C
NEW QUESTION # 41
Which task is typically associated with network administration?
- A. Writing programming code
- B. Creating database queries
- C. Configuring routers and switches
- D. Designing user interfaces
Answer: C
NEW QUESTION # 42
......
IBM C1000-058 exam is a certification test designed for IT professionals who want to prove their expertise in IBM MQ Version 9.1 system administration. C1000-058 exam covers a wide range of topics related to IBM MQ system architecture, administration, and configuration. Passing C1000-058 exam demonstrates that a candidate has the skills and knowledge required to perform essential MQ system administration tasks and effectively manage an IBM MQ infrastructure.
Reliable Study Materials for C1000-058 Exam Success For Sure: https://www.itcertmagic.com/IBM/real-C1000-058-exam-prep-dumps.html
100% Latest Most updated C1000-058 Questions and Answers: https://drive.google.com/open?id=1WrWdf-B9PXnTsUIJm1eGigDYMDiYP4-a