[Sep-2025] FCSS_NST_SE-7.4 Dumps are Available for Instant Access using ITCertMagic
FCSS_NST_SE-7.4 Dumps 2025 - New Fortinet FCSS_NST_SE-7.4 Exam Questions
Fortinet FCSS_NST_SE-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 22
What are two functions of automation stitches? (Choose two.)
- A. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.
- B. You can configure automation stitches to execute actions sequentially by taking parameters from previous actions as input for the current action.
- C. You can configure automation stitches on any FortiGate device in a Security Fabric environment.
- D. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.
Answer: B,D
NEW QUESTION # 23
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?
- A. FortiGate uses the CN information from the Subject field in the server certificate.
- B. FortiGate closes the connection because this represents an invalid SSL/TLS configuration.
- C. FortiGate uses the SNI from the user's web browser.
- D. FortiGate uses the first entry listed in the SAN field in the server certificate.
Answer: A
NEW QUESTION # 24
Exhibit.
Refer to the exhibit, which shows two entries that were generated in theFSSO collectoragent logs.
What three conclusions can you draw from these log entries? {Choose three.)
- A. The user's status shows as "not verified" in the collector agent.
- B. DNS resolution is unable to resolve the workstation name.
- C. The FortiGate firmware version is not compatible with that of the collector agent.
- D. Remote registry is not running on the workstation.
- E. A firewall is blocking traffic to port 139 and 445.
Answer: A,D,E
NEW QUESTION # 25
Refer to the exhibit, which shows a session entry.
Which statement about this session is true?
- A. It is an ICMP session from 10.1.10.1 to 10.200.5.1.
- B. It is an ICMP session from 10.1.10.10 to 10.200.1.1.
- C. Return traffic to the initiator is sent lo 10.200.1.254.
- D. Return traffic to the initiator is sent to 10.1.0.1.
Answer: A
NEW QUESTION # 26
Refer to the exhibit, which shows a truncated output of a real-time LDAP debug.
What two conclusions can you draw from the output? (Choose two.)
- A. The user is authenticating using CN=John Smith.
- B. FortiOS is able to locate the user in step 3 (Bind Request) of the LDAP authentication process.
- C. FortiOS is performing the second step (Search Request) in the LDAP authentication process.
- D. The name of the configured LDAP server is Lab.
Answer: A,C
NEW QUESTION # 27
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.
What two conclusions can you draw Itom the output? (Choose two.)
- A. FSSO is using DC agent mode to detect logon events.
- B. The logon event can be seen on the collector agent installed on Windows.
- C. FSSO is using agentless polling mode to detect logon events.
- D. The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.
Answer: C,D
NEW QUESTION # 28
Refer to the exhibit, which shows a partial web filter profile configuration.
The URL www.dropbox.com is categorized as File Sharing and Storage.
Which action does FortiGate take if a user attempts to access www.dropbox.com?
- A. Based on the Web Content filter configuration, access to www.dropbox.com would be exempted.
- B. FortiGate blocks the connection, based on the FortiGuard category-based filter configuration.
- C. Based on the URL Filter configuration, FortiGate allows the connection.
- D. FortiGate blocks the connection as an invalid URL.
Answer: C
NEW QUESTION # 29
Refer to the exhibit showing a debug output.
An administrator deployed FSSO in DC Agent Mode but FSSO is failing on FortiGate. Pinging FortiGate from where the collector agent is deployed is successful.
The administrator then produces the debug output shown in the exhibit.
What could be causing this error message?
- A. The collector agent preshared password is mismatched.
- B. The TCP port 445 is blocked between FortiGate and collector agent.
- C. The FortiGate and the collector agent are using different TCP ports.
- D. The FortiGate cannot resolve the active directory server name.
Answer: C
NEW QUESTION # 30
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate?
(Choose two.)
- A. The heartbeat messages can be seen in the collector agent logs.
- B. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- C. The heartbeat messages must be manually enabled on FortiGate.
- D. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
Answer: A,B
NEW QUESTION # 31
Exhibit.
Refer to the exhibit, which contains a screenshot of some phase 1 settings.
The VPN is not up. To diagnose the issue, the administrator enters the following CLI commands on an SSH session on FortiGate:
However, the IKE real-time debug does not show any output. Why?
- A. The debug shows only error messages. If there is no output, then the phase 1 and phase 2 configurations match.
- B. The administrator must also run the command diagnose debug enable.
- C. The log-filter setting is incorrect. The VPN traffic does not match this filter.
- D. Replace diagnose debug application ike -1 with diagnose debug application ipsec -1.
Answer: B
NEW QUESTION # 32
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. An ISDB route
- B. AnSD-WAN rule
- C. A regular policy route, which is associated with an active static route in the FIB
- D. A regular policy route
Answer: A
NEW QUESTION # 33
Refer to the exhibit, which shows the partial output of a real-time OSPF debug.
Why are the two FortiGate devices unable to form an adjacency?
- A. The passwords on the FortiGate devices do not match.
- B. The Hello packet is being sent from an OSPF router with ID 0.0.0.112.
- C. One FortiGate device is configured to require authentication, while the other is not.
- D. The two FortiGate devices attempting adjacency are in area 0.0.0.0.
Answer: C
NEW QUESTION # 34
Exhibit.
Refer to theexhibit,which shows the output of getsystem ha status.
NGFW-1 and NGFW-2 have been up for a week.
Which two statements about the output are true? (Choose two.)
- A. If port 7 becomes disconnected on the secondary, both FortiGate devices will elect itself as primary.
- B. If no action is taken, the primary FortiGate will leave the cluster because of the current sync status.
- C. If a configuration change is made to the primary FortiGate at this time, the secondary will initiate a synchronization reset.
- D. If FGVM...649 is rebooted. FGVM...650 will become the primary and retain that role, even after FGVM...649 rejoins the cluster.
Answer: A,D
NEW QUESTION # 35
Refer to the exhibit.
Assuming a default configuration, which three statements are true? (Choose three.)
- A. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
- B. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.
- C. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
- D. Strict RPF is enabled by default.
- E. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
Answer: B,C,E
NEW QUESTION # 36
Refer to the exhibits.
An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table. What is the most likely cause of this issue?
- A. FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.
- B. A batter route to the 8.8.8.8/32 network exists in the routing table.
- C. The administrator has misconfigured redistribution of routes on FGT-A.
- D. FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.
Answer: D
NEW QUESTION # 37
Refer to the exhibit, which shows the output o! the BGP database.
Which two statements are correct? (Choose two.)
- A. The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.
- B. The first four prefixes are being advertised using a legacy route advertisement.
- C. The output shows all prefixes advertised by all neighbors as well as the local router.
- D. The advertised prefix of 10.20.30.0'24 was configured using the network command.
Answer: C,D
NEW QUESTION # 38
Exhibit.
Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?
- A. FortiGate used 64.26.151.37 as the initial server to validate its contract.
- B. There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
- C. The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.
- D. Servers with a negative TZ value are less preferred for rating requests.
Answer: B
NEW QUESTION # 39
Which two statements are true regarding heartbeat messages sent from an FSSO collector agent to FortiGate? (Choose two.)
- A. The heartbeat messages can be seen in the collector agent logs.
- B. The heartbeat messages can be seen on FortiGate using the real-lime FSSO debug.
- C. The heartbeat messages must be manually enabled on FortiGate.
- D. The heartbeat messages can be seen using the command diagnose debug authd fsso list.
Answer: A,B
NEW QUESTION # 40
Refer to the exhibit.
The exhibit shows the output from using the command diagnose debug application samld -1 to diagnose a SAML connection.
Based on this output, what can you conclude?
- A. The authentication request is for an SSL VPN connection.
- B. The IdP IP address is 10.1.10.254.
- C. The IdP IP address is 10.1.10.2.
- D. Active Directory is used for authentication.
Answer: C
NEW QUESTION # 41
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. An ISDB route
- B. An SD-WAN rule
- C. A regular policy route, which is associated with an active static route in the FIB
- D. A regular policy route
Answer: A
NEW QUESTION # 42
Exhibit.
Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)
- A. There are 98908 kB o! memory that will never be used.
- B. The user space has 708880 kB of physical memory that is not used by the system.
- C. The I/O cache, which has 641364 kB of memory allocated to it.
- D. The value indicated next to the inactive heading represents the currently unused cache page.
Answer: A,D
NEW QUESTION # 43
......
Fortinet FCSS_NST_SE-7.4 Exam Practice Test Questions: https://www.itcertmagic.com/Fortinet/real-FCSS_NST_SE-7.4-exam-prep-dumps.html
Free FCSS_NST_SE-7.4 Braindumps Download Updated: https://drive.google.com/open?id=1WSW6n3sHSSw0KKBlPhnZm80IYS9DxIwN